What are the valves on my pool pump?
Pool valves control the direction of water flow, not just in and out of the pool, but in and out of your pool equipment as well. For example, you want the pool water to enter the filter, and then be expelled in the right direction to continue its path through the plumbing and back to the pool.
How long do Jandy valves last?
Pool valves tend to last between 5-7 years before the exterior plastic parts need to be replaced. As long as the internal parts are working handles can be replaced. If the valves are older than 10 years you may want to replace the whole thing versus replacing just handles.
What kind of valves do I need for my Pool?
Your pool may have a spa, which is known as a “pool-spa combo” so there will be another valve for the main spa drain. Normal operation of the pool requires this valve to stay closed. In the photo below, there are four valves. These are “3-way” style valves. They are, from left to right, SPA MAIN DRAIN, CLEANER, SKIMMER, and POOL MAIN DRAIN.
How to set up pool Diverter Valves for spa?
By rotating Valves 4 and 5 fully clockwise, water flows through Valve 4 to Valves 5 and 6. Valve 6 supplies water to the lion heads and Valve 5 supplies water to the spa fountain. Water to the spa jets and the pool returns is blocked off. FOUNTAIN HIGHER – To increase the height of the fountain from the above setting. rotate Valve 6 45° clockwise.
How to set valves for an in ground swimming pool automatic?
Many pools have suction type cleaners without having a dedicated line for it. This will connect into the skimmer. The valves would be set as skimmer open, main drain closed. Most cleaners come with a skimmer adapter that allow adjustable flow to be able to skim as well as having the cleaner connected.
Is there a check valve in front of the pool pump?
If you don’t have a Check Valve in front of your pump and you notice hard priming issues, it would be a great idea to install one in front of the pump if you can. In the case of the pool in the video the equipment is very far from the skimmer and with a failed Check Valve was struggling badly to even prime each day.
What kind of valve does a pool skimmer use?
One jandy valve for the skimmer and vacuum suction connected to the inlet side of the pump. One jandy valve for the pool return and spa return connected the the return side of the pump and through the heater.
Is the drain valve connected to the spa drain?
The valves should be suction: spa closed pool open, return: spa 1/2 open and all pool return wide open. Ok. thats good. But i believe that the drain valve is connected to both the pool drain and the spa drain. Is that possible that there was design flaw?.
If you don’t have a Check Valve in front of your pump and you notice hard priming issues, it would be a great idea to install one in front of the pump if you can. In the case of the pool in the video the equipment is very far from the skimmer and with a failed Check Valve was struggling badly to even prime each day.
Why are there no return valves in my Pool?
Check Valves Check valves, also known as non-return or one-way valves are installed in plumbing to prevent the backflow of water, usually due to gravity. Also, if the pump is turned off, there’s nothing to keep the water from flowing the wrong way. This could lead to some nasty situations ending up in your pool.
