What are the step test procedures for Kwikee?
Troubleshooting and Test Procedures The step test procedures outlined in this tip sheet are provided to troubleshoot and test all Kwikee IMGL automatic electric step functions. The procedures are designed to initially check the basic functions of the step separately from the RV wiring to determine whether or not the step is malfunctioning.
How do you fix a stuck motor on a Kwikee?
1. Disconnect power to the step 2. Disconnect the power plug from the motor assembly 3. Using a 10mm socket, remove the 3 screws holding the motor assembly 4. Lower it straight down being certain not to drop the gear, washers and pin on the gear assembly side of the motor 5. Move the washers, gear and pin to the new motor 6.
Where is the four pin connector on a RV step?
Locate the four pin connector that powers the step. Follow the procedures outlined in the Lippert Owner’s Manual for testing the power output (red wire) and switch control voltages (other 3 wires) from the magnetic door switch, override switch and ignition switch.
Is it possible to repair a stuck RV step?
Whether you are a seasoned or aspiring RV traveler, you’ll find something informative and entertaining here. Get empowered to take on a DIY project of your own. You’ll be surprised how much you can do with just basic DIY skills.
How does the Kwikee step motor conversion kit work?
Improved control unit logic keeps the step open when the RV door is open. Steps can be locked in the extended position, and new automatic ignition override helps the step follow the door. What other items do customers buy after viewing this item?
What is the control unit on a Kwikee step?
The 9510 Control Unit keeps the step open when the door is open. Step can be locked in the extended position, but cannot be locked in the retracted position. Automatic ignition override makes step follow the door.
Where is the gear linkage on a step RV?
Refer to the Lippert manuals for your specific Kwikee step model for the correct wiring. You can find the manual for your Kwikee step model here. The motor is mounted on top of the gear linkage with three bolts. It drives the gear linkage in forward or reverse when activated by the controller.
What makes a Kwikee step assembly so durable?
Durable – Each 300-pound-capacity Kwikee step features the strength of air-pressed rivets for long-term strength. Kwikee steps are lightweight and durable, and its weatherproof wiring and connectors prevent shorts and corrosion in the system.
