What are the ratings of a sp800 water heater?
It includes one (SP800) or two (SP1200) heating element legs, one (SP800) or two (SP1200) over temperature cut-out devices, an optical water sensor and a digital water temperature sensor. Models are available with heater ratings of 2.0kW or 3.0kW (SP800) and 3.5kW, 4.5kW or 6.0kW (SP1200).
What is the sp800 and SP1200 installation and service manual?
SP800 & SP1200 Installation & Service Manual The SP800 and SP1200, mid to high end range of spa pool control systems can be installed and configured in many ways for many different pool configurations.
What should I know about the sp800 pool control system?
PART ONE – INSTALLATION 1 System Description The SP800 and SP1200 spa pool control systems are capable of implementing all the control features of a mid level (SP800) or a high end (SP1200) spa pool, up to a maximum system current of 40Amps single phase or 16Amps per phase, three phase. The SP800 and SP1200 systems consist of the following parts.
How many amps does a spa water heater use?
Make sure valves are open and water level is high enough in spa. Remove filter cartridge and recheck heater with amp meter. (120v should read 12.5 amps; 240v should read 25 amps, however this may vary on specific spa models – check your instruction manual for proper readings for your unit.)
It includes one (SP800) or two (SP1200) heating element legs, one (SP800) or two (SP1200) over temperature cut-out devices, an optical water sensor and a digital water temperature sensor. Models are available with heater ratings of 2.0kW or 3.0kW (SP800) and 3.5kW, 4.5kW or 6.0kW (SP1200).
SP800 & SP1200 Installation & Service Manual The SP800 and SP1200, mid to high end range of spa pool control systems can be installed and configured in many ways for many different pool configurations.
How does a whirlpool spa heater pump work?
…quiet design. Designed to circulate hot water in (whirlpool) spa baths, these pumps incorporate a special internal design to ensure the pump self drains eliminating the build up of unhygenic/stale water. Mechanical Hydromassage Hot spa pump with unions and Air Switch. Temperature: Primary Heating…
PART ONE – INSTALLATION 1 System Description The SP800 and SP1200 spa pool control systems are capable of implementing all the control features of a mid level (SP800) or a high end (SP1200) spa pool, up to a maximum system current of 40Amps single phase or 16Amps per phase, three phase. The SP800 and SP1200 systems consist of the following parts.
