What are the problems with my Jandy PDA?

My Jandy PDA is 5 years old. It started having problems about a year ago when the “Select” button partially detached from the silicone membrane causing us to have to pick it up with a fingernail every time we needed to press it. More recently the other buttons became unresponsive and/or double triggered.

What do you need to know about Jandy Aqualink?

Value-Oriented Automation for Feature-Rich Pools and Spas The Jandy AquaLink PDA automation system provides feature-rich, complete pool and spa contro… Loses communication, needed to change channels twice sometimes very slow to make changes to system remotely. hard to see lcd display! So far we’ve been very pleased with our Jandy PDA.

What can you do with a PDA in a pool?

The PDA system also includes the AquaLink Wireless Handheld Remote for convenient in-home or pool-side control and programming. Virtually every function of your pool can be controlled, including jets, lights, pool/spa switching, pump speeds, and heater or heat pump temperature and control settings, to name a few.

What kind of phone do I need for Jandy?

I have a Samsung Galaxy S5 phone which is water-resistant and use this to control my Jandy automation though an iAqualink phone app poolside. That could be useful, but you need the aqualink interface to go with it. Not even sure if the system at my potential new home can be upgraded to that.

Is it OK to use inauthentic Jandy replacement parts?

Use Genuine Factory Parts—It Does Matter! Using genuine Jandy factory replacement parts helps to ensure the ongoing quality and reliability of our products. Plus, the use of inauthentic parts voids all factory warranties. Inauthentic parts may appear to be suitable on the surface, but they often fall short of factory standards.

When did the last Dell PDA come out?

Not to be left out of all the PDA fun, Dell entered the PDA arena with its Axim line in 2002. Over the next several years, the firm produced over a dozen color touch-screen devices, all of which ran variations of Microsoft’s Pocket PC/Windows Mobile operating system. Dell introduced its last Axim model, the X51v in 2005 and discontinued it in 2007.

Is the Jandy Aqualink PDA in waiting mode?

I have a jandy power center PCB 8124a. It will not power the i have a jandy power center PCB 8124a. It will not power the filter pump module … read more Jandy PDA handheld 1.38 is stick in “waiting” mode. I attem Jandy PDA handheld 1.38 is stick in “waiting” mode.

Can a Jandy remote model 8265 be replaced?

Pool has fountains to be controlled sep … read more I have a Jandy remote model 8265 that i need to replace. it got wet and has never worked the same since. Can i install it myself? how do i connect it to the system? Can I update the firmware on the J- … read more

What does the Jandy aquapure water softening system do?

Jandy’s AquaPure sanitizes swimming pools. AquaPure is a salt chlorine generating system used to sanitize your pool, using a closed-loop water-softening system. As with any electronic and mechanical systems, problems can occur.

Why is my Jandy PDA stuck on waiting?

Cycle the computer My Jandy PDA is also stuck on waiting. Cycle the computer power breaker and it connects as usual. Power PDA off and on again, stuck in waiting. … read more

Why does my Jandy PDA model 8265 not work?

My jandy PDA model 8265 is stuck opn waiting. I’ve tried changing the RF Channel but no response from the Jbox … read more I have a Jady Aqualink RS PDA. I’ve had it years now working I have a Jady Aqualink RS PDA. I’ve had it for 3 years now working fine. It turned on the hot tub and then showed handheld:3.0 Battery:ok RF … read more

What happens when you reset a Jandy Aqualink system?

You can also use the control pad to establish and record settings based on day or time, or set them automatically based on personal preferences at that moment. If you wish to delete all stored information, resetting the system can delete the memory. Keep in mind, however, that once you delete the information, you cannot restore it.

Why does my Jandy pro handheld remote not work?

Signal strength is affected as the Handheld Remote is moved farther away from the Transceiver J-Box. Also, obstructions, such as walls, can lower the signal strength if located between the Handheld Remote and the Transceiver J-Box. Section 2. Replace Battery Door, Door Seal, and Screws 1.

What’s the best way to fix a Jandy PDA?

1) Open the PDA. At first glance the PDA looks pretty impenetrable with its overmolded rubber housing, but actually, the front panel comes off fairly easily. The idea is to pull the rubber away from the edge just enough to get a screwdriver or spudger tool under the lip.

What kind of firmware do I need for Aqualink PDA?

Click to expand… Autelis make a PDA interface for mobile devices. If you upgrade your Aqualink firmware to ver. MMM which requires a chip only (not an entire new board) you can use the full Autelis interface and get more functionality, better speed and home automation capability. Enjoying this content?

Can a Jandy Aqualink remote control a pool?

Value-Oriented Automation for Feature-Rich Pools and Spas The Jandy AquaLink PDA automation system provides feature-rich, complete pool and spa contro… With the AquaLink Wireless Remote you can control and program your pool with ease.