What are the problems with my Jandy aquapure 1400?
I did replace the salt generating cell for my Jandy Aquapure 1400 about two years ago from the square model to the circular model. Over the winter it is flushed and cleaned by my pool company. Now it is giving me additional problems. I first noticed a few days ago that it had an error code – service code 121.
How much does a Jandy 1400 Aqua Pure salt cell cost?
This is the Jandy 1400 Aqua Pure Salt cell. This unit has a failed R0452500 OEM Salt Flow/Temperature/Salinity Sensor at the time of this cleaning (Error code 172, 186). You can get the sensor online for about $200.00.
How old is the Jandy salt generating cell?
My pool, and all related equipment are about 6 years old. I did replace the salt generating cell for my Jandy Aquapure 1400 about two years ago from the square model to the circular model. Over the winter it is flushed and cleaned by my pool company. Now it is giving me additional problems.
What should I do if my Jandy pool sensor dies?
Make sure you get the PLC1400 kit with sensor and cable. It will be an easy switch, just plug and play type of thing. Do not cut the cable, do like you are saying and wrap the cable up and leave the sensor in place just in case you need to use it if a sensor dies on you.
I did replace the salt generating cell for my Jandy Aquapure 1400 about two years ago from the square model to the circular model. Over the winter it is flushed and cleaned by my pool company. Now it is giving me additional problems. I first noticed a few days ago that it had an error code – service code 121.
Is it OK to use inauthentic Jandy replacement parts?
Use Genuine Factory Parts—It Does Matter! Using genuine Jandy factory replacement parts helps to ensure the ongoing quality and reliability of our products. Plus, the use of inauthentic parts voids all factory warranties. Inauthentic parts may appear to be suitable on the surface, but they often fall short of factory standards.
What do you need to know about Jandy pro?
Promise to maintain the highest quality standards in all areas of operation. Promise to use high quality materials and world-class processes to manufacture our products. Promise that your equipment will arrive completely tested in pool environments, inspected, and quality-assured. We stand by our promise.
Is there a warranty on Jandy pool equipment?
Jandy pool equipment is sold exclusively through a nationwide network of qualified pool professionals with the expertise and ability to help pool owners make the best equipment decisions for their individual pool needs. Therefore, we do not provide a Manufacturer’s Warranty on Jandy equipment purchased online through any internet retailer.
This is the Jandy 1400 Aqua Pure Salt cell. This unit has a failed R0452500 OEM Salt Flow/Temperature/Salinity Sensor at the time of this cleaning (Error code 172, 186). You can get the sensor online for about $200.00.
My pool, and all related equipment are about 6 years old. I did replace the salt generating cell for my Jandy Aquapure 1400 about two years ago from the square model to the circular model. Over the winter it is flushed and cleaned by my pool company. Now it is giving me additional problems.
Make sure you get the PLC1400 kit with sensor and cable. It will be an easy switch, just plug and play type of thing. Do not cut the cable, do like you are saying and wrap the cable up and leave the sensor in place just in case you need to use it if a sensor dies on you.
What does the Jandy aquapure water softening system do?
Jandy’s AquaPure sanitizes swimming pools. AquaPure is a salt chlorine generating system used to sanitize your pool, using a closed-loop water-softening system. As with any electronic and mechanical systems, problems can occur.
How to troubleshoot a Jandy aquapure power supply?
If salinity is low, more salt may need to be added. Clean the cell if it is dirty or clogged. Check that the unit is connected to a power supply and the pump is switched on. Fully insert into the connector the ribbon cable between front and back PC board. Properly connect the connector at the white plug between the transformer and back PC board.
What is the error code for the Jandy aquapure 1400 salt cell?
Jandy Aquapure 1400 Salt Cell: You are watching it now. This is the Jandy 1400 Aqua Pure Salt cell. This unit has a failed R0452500 OEM Salt Flow/Temperature/Salinity Sensor at the time of this cleaning (Error code 172, 186). You can get the sensor online for about $200.00.
What are the different types of Jandy power centers?
Take control of your swimming pool with Jandy Pro Series control system power centers. Available in foundation, standard and sub‐panel with 12 breaker mount plate slots and knockout… Purelink Power Centers combine all the features of the AquaLink Power Centers and AquaPure water…
How to check the salinity of a Jandy pool?
•The system will display the salinity reading, press the up arrow to increase the reading and the down arrow to decrease the reading. •When the proper reading is reached press the “Temperature” button within 5 seconds to store it in memory. 15 Transformer Voltage on Rev. 2 backboard Reading the AC voltage between T.P.-
How do you calibrate an aquapure water heater?
•Press the “Salinity” button and hold it until it beeps 3 times. The system will beep when you push it and then at 5 seconds and again at 10 seconds. Release the button after the 3rdbeep. •Press and release the “Temperature “ button within 5 seconds to enter the salinity calibration screen.
How to change the salinity reading on aquapure?
•Press and release the “Temperature “ button within 5 seconds to enter the salinity calibration screen. •The system will display the salinity reading, press the up arrow to increase the reading and the down arrow to decrease the reading. •When the proper reading is reached press the “Temperature” button within 5 seconds to store it in memory. 15
How do I Reset my aquapure flow sensor?
Connect it to the unit and place it in a bucket of the pool water to compare readings. Note-The unit must have the power turned off before either the old or new flow sensor can be installed. Each time a flow sensor is unplugged and plugged back in again the computer inside the unit must be reset by turning the power ‘off’ and then ‘on’.
How does Jandy aquapure salt water pool system work?
The Jandy AquaPure ® salt-water chlorine sanitizing systems use salt water to deliver high-performance water sanitation with uncompromised performance, reliability and hydraulic efficiency. Rely on its sturdy design and simple features to create your saltwater oasis.
•Press the “Salinity” button and hold it until it beeps 3 times. The system will beep when you push it and then at 5 seconds and again at 10 seconds. Release the button after the 3rdbeep. •Press and release the “Temperature “ button within 5 seconds to enter the salinity calibration screen.
•Press and release the “Temperature “ button within 5 seconds to enter the salinity calibration screen. •The system will display the salinity reading, press the up arrow to increase the reading and the down arrow to decrease the reading. •When the proper reading is reached press the “Temperature” button within 5 seconds to store it in memory. 15
How does Aqualink and aquapure work together?
Exclusive Tri-Sensor technology provides reliable electronic water flow detection to sustain maximum performance, even at very low flow rates When combined with PureLink™ power centers, AquaLink and AquaPure work together for the ultimate in pool sanitizing and remote operation convenience
What is code 172 on Jandy aquapure error code?
Salinity sensor sees less than .2 GPL of salt. Either there’s no salt in the pool or sensor is air locked. Flow salinity sensor temperature probe error codes. 1.They all generates code 172- Flow sensor service is required. 2. Perform diagnostic test on board to ensure the board isn’t faulty. If not the board, the tri-sensor is the culprit. 3.
How old is the no flow sensor on Jandy aquapure?
The sensor is only about a year and a half old. The Chlorine cell is about 4 years old. I cleaned the cell (some build up but not bad at all just a light coating). Polished the sensor and still nothing. THe Chloirine level has been droppinng to next to nothing over the week before I noticed the no flow and cleaned the cell.
How can I troubleshoot my Jandy aquapure pool?
1. Check input voltage, transformer, and back board voltages. 2. Troubleshoot with Jandy or a licensed professional. 1. Check input voltage, transformer, and back board voltages. 2. Troubleshoot with Jandy or a licensed professional. 1. Adding salt to your swimming pool 2. Add salt to pool to achieve 3.0 gpl 1. Recalibrate salt reading. 2.
Salinity sensor sees less than .2 GPL of salt. Either there’s no salt in the pool or sensor is air locked. Flow salinity sensor temperature probe error codes. 1.They all generates code 172- Flow sensor service is required. 2. Perform diagnostic test on board to ensure the board isn’t faulty. If not the board, the tri-sensor is the culprit. 3.
