Is there a problem with my Hydropool Hot Tub?

Is there a problem with my Hydropool Hot Tub?

Hi there…we have a Hydropool… Hi there…we have a Hydropool Hot Tub that keeps showing the HL code and won’t come on. The problem is that it’s only at 98 degrees. The temperature often shows 104 or 105 but it really is only at the 98 degree mark.

Where is the return valve on a Hydropool Hot Tub?

Close the return valve (s), usually located directly beside the hose bib. 10. Open the hose bib and press the jet button once. The topside panel will show DRN to indicate that the tub is in drain mode.

When is the best time to use a Hydropool?

Many Hydropool owners report that their favourite time to use a hot tub is in the cooler fall and winter months, while others praise the enjoyment of using their hot tub in the warmer spring and summer months.

What to do if your hot tub is too hot?

Contact your supplier or local hot tub technician. The temperature inside the spa skirt is too high, causing the internal temperature in the spa pack to increase above normal limits. DO NOT ENTER THE WATER. Take the cover off and allow the water to cool. If possible, remove the spa cabinet on the control board side.

Hi there…we have a Hydropool… Hi there…we have a Hydropool Hot Tub that keeps showing the HL code and won’t come on. The problem is that it’s only at 98 degrees. The temperature often shows 104 or 105 but it really is only at the 98 degree mark.

Close the return valve (s), usually located directly beside the hose bib. 10. Open the hose bib and press the jet button once. The topside panel will show DRN to indicate that the tub is in drain mode.

Many Hydropool owners report that their favourite time to use a hot tub is in the cooler fall and winter months, while others praise the enjoyment of using their hot tub in the warmer spring and summer months.

Why is my hot tub water not hot?

When you find that your hot tub water temperature is no longer hot, it’s time to check the hot tub heater to see if it is working properly. One heater element you’ll need to check is the high limit switch. If you find that this switch has tripped, this is a sign that your heater pump may not be defective.

You Might Also Like