Is the Sunpak S34 TSR a gas or infrared heater?

The Sunpak S34 TSR is an outdoor gas-fired infrared heater which is operated with a wireless remote control. The heater can be operated at a High setting with an input of 34,000 BTU/Hr or at a LOW setting of 25,000 BTU/Hr. Each heater comes with wireless operating remote controls that are pre-programmed for that heater.

What are the specs for a Sunpak patio heater?

Specification: Patio Heater shall be Sunpak Model S34-TSR or equivalent with adjustable input from 25,000-34,000 Btu/Hr, utilizing a ceramic burner, electronic ignition, flame rectification safety, operating with 7.5 VDC control, wireless handheld remote.

Where are the remote controls on a Sunpak heater?

Each heater comes with wireless operating remote controls that are pre-programmed for that heater. The number located on the louvered end of the heater corresponds to the number on the remote control.

Which is better S34 or S25 patio heater?

S25 offers a lower radiant heat output which allows this heater to be located in patios with limited ceiling height. S34 offers a greater radiant heat output which allows this heater to be located higher. Also note the above and side clearance requires increases with the higher BTU/Hr unit.

Is the Sunpak s34-tsh a patio heater?

Sunpak Model S34-TSH (Two Stage Hardwired) The NEW Sunpak® two-stage patio heater is ideal for the commercial environment. Two levels of heat are controllable with an included simple switch. The hardwired control allows you to design a system to control multiple heaters from a panel if desired and durable enough for commercial applications.

What kind of gas heater does Sunpak use?

Available in Black or Stainless Steel, the Sunpak® Models S25 & S34 are outdoor rated heaters available for use with natural or propane gas. These heaters can be either wall or ceiling mounted.

What are the requirements for a Sunpak patio heater?

Specification: Patio Heater shall be Sunpak Model S25 or S34 , utilizing a ceramic burner, electronic ignition, flame rectification safety, operating with 24 VAC control. Heater casing to have dimensions of 8″ x 8″ x 48″ long and the heater must be CSA design certified for outdoor use. Follow Manufacturer’s clearance to combustibles requirements.