Is the low salt light on on my intellichlor?

My pentair intellichlor ic40 low salt light is on and will not turn off. I had the water tested and the salt level… My intellichlor isn’t working….it says low salt, but the water test says salt is good. Or it has no lights on at all. … read more I have a Pentair IC40. I tested the salt level in the pool I have a Pentair IC40.

Why is the Red low salt light on?

So, the red low salt light is on, but the green Cell light is also on and it appears to be producing chlorine, i.e. a fair amount of bubbles come out of the return lines when the cell light is on and no bubbles appear when the cell light is off.

What does the low salt light mean on a pool?

If the “Low Salt” light is flashing red, then the sensor is calculating the salt to be between 2,600 and 2,800 ppm and it wants you to add salt, but it should continue to work. If the Cell light is solid green, then it is working.

Is the low salt light on on my ic-40?

Recently the low salt light came on on my IC-40. The cell light is still green and it appears to make chlorine. The salt readings are 3570 with the Aquacheck test strips and an even 4000 with the Taylor 1766 drop test (not sure which one is the more accurate – anybody know?). The water temp in 64deg.

What does the low salt level light mean?

The salt level indicator lights Both the red and the green do not seem to be operating. If I power the system down and then back up, the Red … read more Not producing chlorine. Says salt is low (lights), but actually Not producing chlorine. Says salt is low (lights), but actually just right (pool supply store test).

Is the low salt Lite code still present?

Nothing else loses voltage so I jumped 12 volts to the cells voltage terminal and presto The unit is making chlorine. The low salt lite and code 91 are still present but the cell keeps it’s voltage. ANYBODY WANT TO GIVE ME THERE THOUGHTS. We receive lots of comments about low salt codes that won’t go away.

Why does my pool have a red low salt light?

“If the salinity is below 2600 ppm, the salt display will light the red LOW SALT indicator, and the CELL light will go blank, indicating there is not enough salt in the pool for chlorine to be produced.” “If the red LOW LED salt light is on, no chlorine is being produced. Add salt to the pool water”

Why does my Pentair intellichlor ic40 need more salt?

Doesn’t seem to read salt level correctly so cell doesn’t produce chlorine. … read more Our 3-year old Pentair IntelliChlor iC40 Salt Cell has steadily required more an more salt (up to 4000ppm) even though we regularly clean it.

Is the Red flow light on on intellichlor?

I have a new intellichlor cell (installed 2 months ago) flashing red/green salt lights. the Red flow light is on. Thing is, the salt level reported by screenlogic and tested at the pool store is good (3350), and the flow is fine (see waterfall on video).

What do the lights mean on an ic40 pool?

Pressing and holding the “More” button launches the System Status Mode. When the lights finish scrolling, the percent lights indicate hours of usage in 1,000s. For example, if the 40% light lights, that indicates 4,000 hours. Version 3.1 on adds the ability to determine system temperature.

Is the Pentair ic40 low salt light on?

My pentair intellichlor ic40 low salt light is on and will not turn off. I had the water tested and the salt level is My pentair intellichlor ic40 low salt light is on and will not turn off.

What should low salt level be on pool chlorinator?

Chlorinator stopped working and showed low salt. Went back for another reading and the salt level was still within range. Called Pemtair and was told that the IC40 unit is set for optimal operating at 77 degrees. For each degree below that, the unit reads 100 ppm less salt.