Is it OK to reuse a pool pump shaft?
Yes, your existing motor will already have a seal on the shaft and it might appear to be in good shape and ok to reuse. However, shaft seals warp over time. If you install the old seal on a new motor, there is a good chance it will not mate properly, leading to leakage which voids the warranty on the new motor.
Do you need to replace the wet end of a pool pump?
In the majority of cases, when a pump fails, the wet end is fine and only the motor needs to be replaced. Since a pump motor is roughly half the price of a new pump, it makes often sense to keep the existing wet end and just buy a new motor. Especially true for DIYers who don’t have to pay an installer.
Is it bad to keep a pool pump going 24 / 7?
Some believe in keeping it going 24/7 which might be necessary under certain conditions but for most pools is just wasteful overkill. It drains both energy and money while causing unnecessary strain on the pool pump motor. Your pump will burn out more quickly and require replacement of parts or the entire unit.
Is it better to have an oversized pool pump?
If you are into the math behind pump run times and savings, read our How to Reduce Your Pool Pump Energy Bill guide. There is a very persistent myth in the pool world that the higher the horsepower, the better. As a result, it is probably safe to say that the majority of pools have oversized pumps.
Is there an inground spa for a pool?
An attached spa can also be installed inground or elevated above ground. An attached inground spa is built level with the pool; usually one wall of the pool serves as a wall of the spa.
How to replace an inground pool jet fountain?
Pool Cooler – Decreases the pool water temperature 8-10 degrees – Do it yourself Install – Easy to Install, Easy to Dismantle – No extra energy required to operate – Made in USA – Fits 1 1/2 Inch Return Jets. . . Custom Install Parts Round Tan Taupe Replacement Cap Cover for In Ground Deck Jet Fountain…
What to add to a pool and spa combo?
When building a pool and spa combo, you can customize an inground spa in a number of ways, from adding LED lighting to attaching massage jets. You can also install a bubbling system for added sound and a relaxing effect.
How big of a pool do you need for a spa?
An average 6 ft. diameter will fit 6-8 people and an 8 ft. diameter will fit 8-10 people. No matter which color or how many options you prefer, an inground spa enhances your pool and spa combo.
