Is algaecide and shock the same?
Shocking your pool and adding an algaecide to the water are two ways to get rid of the sickly green color caused by algae growth, but you shouldn’t do these things at the same time. Chlorine combines with the algaecide ingredients and renders them useless.
Can you use shock and algaecide in a pool?
Using an algaecide regularly can help pools that seem prone to algae, but never add shock and algaecide together, the shock will kill (render useless) most types of pool algaecides, which are better used for preventing, not killing algae.
How long does it take for algaecide to dissipate from a pool?
Allowing the algaecide to naturally dissipate will normally take 2 to 3 days but could take over a week. For many pool owners, this is not an acceptable option, especially since this situation tends to occur during peak pool-use season.
Can you use clarifier after a pool shock?
Algaecide is for prevention, don’t add right after shocking, the shock will destroy the algaecide and waste it. Wait a few days after shocking. Clarifier can help clear the water, as can running the filter non-stop.
When to put shock and chlorine in pool?
Pour the shock into the pool in the late afternoon or evening, and run the circulating pump all night. Monitor the chlorine level, and when it falls below 5 ppm, add an algaecide to prevent further algae growth. Chris Deziel is a contractor, builder and general fix-it pro who has been active in the construction trades for 40 years.
Do you need to shock your pool before using algaecide?
In fact, algaecides usually require a shock treatment before application anyway. So unless you’re dealing with mustard algae or black algae, leave the algaecide on the shelf and get ready to shock the heck out of your pool. But when dealing with regular ol’ green pool algae, chlorine is your best bet to kill it dead.
Algaecide is for prevention, don’t add right after shocking, the shock will destroy the algaecide and waste it. Wait a few days after shocking. Clarifier can help clear the water, as can running the filter non-stop.
Pour the shock into the pool in the late afternoon or evening, and run the circulating pump all night. Monitor the chlorine level, and when it falls below 5 ppm, add an algaecide to prevent further algae growth. Chris Deziel is a contractor, builder and general fix-it pro who has been active in the construction trades for 40 years.
When to add algaecide to pool water to prevent mold?
Monitor your pool for a few days to see if any mold returns, running your pump regularly. After five to seven days, you can add algaecide to complete the cleaning process. Algaecide will work with the chlorine or oxidizer to kill and prevent white water mold from returning.
