How to turn off Summer Mode on hot springs spa?
Set the temperature control to 80°F (26°C). On the control panel, simultaneously press and hold for three seconds Temp Plus and Temp Minus buttons to activate the Summer Timer. The Summer Mode must be deactivated when cooler temperatures return.
What is summer timer on Hot Springs Spa?
efficient 24 hour circulation mode that keeps the heater operation and operating costs to a minimum during colder/heavier usage months. of the desired eight-hour shut down time. IMPORTANT: The Summer Mode timer will not lower the spa’s water temperature below the ambient air temperature.
Can you run a hot tub on a timer?
You just need an Intermatic or Tork timer in a 3R enclosure. When you say 50A is that the hot tub’s actual draw or the size of the breaker? None of those timers have 50A contacts so you’ll probably end up having to use a contactor.
How do you set the timer on a caldera spa?
Press and hold down the “Set” button for three seconds until the “F1” or “F2” icon flashes in the display. Press “Light” to select between Filter Cycle 1 or 2. Then select the “Temp Up” or “Temp Down” arrows to choose the length of the filter time preferred.
Can a hot tub cover be used as a timer?
Speak to your energy company about the potential savings for this type of timer use. A good quality hot tub cover that’s fitted specifically for your tub couple with a thermal blanket to lay on the water’s surface may keep in enough heat to turn off your hot tub for short periods of time.
How to deactivate the spa lock on a hotspring?
To deactivate the SPA LOCK, press the LIGHT minus (-) and TEMP minus (-) buttons at the same time and hold them down until the word SPA and the lock symbol are no longer illuminated on the display (approximately two seconds). The TEMPERATURE LOCK feature deactivates the temperature control function of the main control panel.
Can a hot spring spa go into summer mode?
If your Hot Spring spa is equipped with a circulation pump, the Summer Mode option on the control panel allows you to take advantage of the warmer air temperature and save on summer electricity bills. In Summer Mode, your spa’s heater and circulation pump turn off for 8 hours to save electricity.
How do I reset the timer on my caldera spa?
You can operate the jets on high speed by pressing the Jets button, but this will affect the timer settings. The settings can also become deactivated or locked, or can be affected by a malfunction that has nothing to do with your operation of the spa’s keypad. In these cases, the timer will need to be unlocked or reset.
How does the timer work on caldera Olympia?
The Olympia model will run the one-speed jet pump on high speed when the button is pressed for a fourth time, and turn the jets off when the button is pressed for a fifth time. The timer in Caldera spas operate the filter cycle and place the jets on low speed for the duration of the cycle.
Are there Intermatic time clocks for hot tubs?
Intermatic Hot Tub & Spa Timers and Time Clocks. Intermatic Mechanical Time Clocks for Hot Tubs And Spas. — Hot Tub Warehouse
When do you turn off the jet pump on a caldera spa?
If you place the jet pump on high during the filter cycle, the filter icon will blink in the display and not resume until 10 minutes after the jet pump is shut off. Press the “Set” button to deactivate the Spa or Temperature Locks.
