How to turn off pump 1 on the ThermoSpas?
Pump 1 Pump 1 is a 2 speed pump. Pressing once puts the pump into low speed, indicated on the LCD by a slow moving pump icon . Pressing a second time activates Pump 1 to high speed (icon moves faster). To turn off, press a third time (icon disappears from the LCD).
What can I do if my ThermoSpas Spa is high?
Please contact ThermoSpas Customer Care Department at 800-876-0158, option 2. What can I do if the pH is my spa is high (over 8.0) and will not come down? Follow these steps: Turn on all pumps and add 1 ounce of ThermoSpas® pH Down.
How to contact the ThermoSpas customer care department?
Upon completion of Step 3, if the pH is still high, contact the ThermoSpas Customer Care Department at 800-876-0158, option 2. Do hot tubs with Ozonators require fewer chemicals?
How does the ThermoSpas work in standard mode?
Pressing the ‘Pump 1’ button will change the mode to Standard and display the Economy-in-Standard icon. The spa will automatically revert to Economy mode after one hour (or instantly if you press ‘Mode/Prog’). Sleep Mode heats the spa to within 20° of the temperature set-point, but only during filtration cycles.
How are the ThermoSpas at Park Avenue spa?
Park Avenue is rated 4.7 out of 5 by 35. Rated 5 out of 5 by Spa2019 from Loyal customer because of quality We had our first Thermospa for 30 years. Now we are now on our second one. Amazing spas built to last, top quality.
Pump 1 Pump 1 is a 2 speed pump. Pressing once puts the pump into low speed, indicated on the LCD by a slow moving pump icon . Pressing a second time activates Pump 1 to high speed (icon moves faster). To turn off, press a third time (icon disappears from the LCD).
Is there a full size hot tub at Park Avenue?
The Park Avenue is often called the perfect full-size hot tub. It has a double-wide, reversible lounge with large, soft, textured pillows on both ends which allow bathers to lie side by side or stretch out face to face. At the opposite end of the spa are two perfectly contoured therapy seats, each with wrap-around armrests and built-in pillows.
What can I do if my ThermoSpas hot tub is not working?
If you reach the point of having no luck with keeping your water in balance, and have tried draining and refilling your tub, you can send us a sample of your hot tub water for analysis. Please contact ThermoSpas Customer Care Department at 800-876-0158, option 2. What can I do if the pH is my spa is high (over 8.0) and will not come down?
How do I change the spa to standard?
The Economy icon will be displayed unless the mode is changed. Pressing the ‘Pump 1’ button will change the mode to Standard and display the Economy-in-Standard icon. The spa will automatically revert to Economy mode after one hour (or instantly if you press ‘Mode/Prog’).
When did ThermoSpas start making hot tubs?
ThermoSpas began manufacturing spas in 1983 and launched the direct to the consumer spa business in 1995. ThermoSpas corporate headquarters is proudly located in the US and has full-time employees across the country. Too Much Chlorine in Your Hot Tub? Here’s How to Fix It
Upon completion of Step 3, if the pH is still high, contact the ThermoSpas Customer Care Department at 800-876-0158, option 2. Do hot tubs with Ozonators require fewer chemicals?
Pressing the ‘Pump 1’ button will change the mode to Standard and display the Economy-in-Standard icon. The spa will automatically revert to Economy mode after one hour (or instantly if you press ‘Mode/Prog’). Sleep Mode heats the spa to within 20° of the temperature set-point, but only during filtration cycles.
What do the warm and cool buttons do on a ThermoSpas?
Warm & Cool The warm & cool buttons are used to change the temperature set-point of the spa. When either button is pressed, “Set Temperature” is displayed on the LCD and the temperature can be adjusted. The minimum set point is 80°, while the maximum is 104°.
Pressing the ‘Pump 1’ button will change the mode to Standard and display the Economy-in-Standard icon. The spa will automatically revert to Economy mode after one hour (or instantly if you press ‘Mode/Prog’). Sleep Mode heats the spa to within 20° of the temperature set-point, but only during filtration cycles.
Warm & Cool The warm & cool buttons are used to change the temperature set-point of the spa. When either button is pressed, “Set Temperature” is displayed on the LCD and the temperature can be adjusted. The minimum set point is 80°, while the maximum is 104°.
