How to troubleshoot Hayward pool OnCommand troubleshooting guide?

Remove the two screws and open the door to access the wire harness connecting the display panel to the integrated control board. Next, disconnect the harness from the display board and remove the door from the hinges. To remove the right side panel Remove the two screws and open the door. Next, slide the door towards the right to remove.

How to turn off auxiliary relay Hayward pool assets?

The auxiliary button that was programmed to function as “filter low speed” will now become inactive. The high and low speed are now toggled by pressing the filter button, first time=high, second time=low, third time=off. 2. Any auxiliary relay that is “Interlocked” will not activate unless the system is in Pool Mode

How to set the high and low speed on Hayward pool?

The high and low speed are now toggled by pressing the filter button, first time=high, second time=low, third time=off. 2. Any auxiliary relay that is “Interlocked” will not activate unless the system is in Pool Mode and the Filter Pump Relay has been activated for at least three (3) minutes. 3.

How many Hayward heaters can a Prologic system control?

• All ProLogic systems are salt chlorination ready and can control 4-16 high voltage relays, 3-4 valve actuators and 1-2 heaters. • These systems can manage: Hayward Variable Speed Pumps, ColorLogic Lighting, Sense & Dispense, AquaConnect Homenet, as well as a wide variety of remotes. • The panel features an 8 slot, 100amp subpanel.

Is there an OnCommand controller for a pool?

This entry level controller is an ideal replacement for outdated pool time clocks. Works with Hayward’s AquaConnect remote pool management platform with apps for iPhone, iPad and Android. * OnCommand® is the most affordable way to automate essential pool and spa functions for aftermarket applications.