How to test the 5 button air conditioner comfort?

Be sure to disconnect all power and turn all switches to the ﬁOFFﬂ position, before starting to do the tests. Remove the terminal cover from the compres- sor and disconnect the three leads connected to the terminals. Make note of the positions so the wires can be replaced correctly .

What do the comfort 14 air conditioners do?

14 SEER for moderate energy savings with standard comfort features. The Comfort series of air conditioners is designed to give you simple, efficient, affordable cooling. And with impressive SEER ratings they can still make you smile when it comes time to pay your energy bill.

What is the symptom of duo therm Comfort Control Center?

Duo-Thermﬁ Comfort Control Center Systems SYMPTOM CAUSE REFER TO STEP This program will address the most common system problems associated with the Duo-Therm Comfort Control Center supplied by The Dometic Corporation.

What kind of warranty does comfort 13 air conditioner have?

1 Quietest size within each model group during most common operating condition. 2 To the original owner, when product is used in an owner-occupied residence, a 10-year parts limited warranty upon timely registration of your new equipment. Warranty period is 5 years if not registered within 90 days.

How to turn on Comfort Control Center 2 thermostat?

To turn ON the CCC 2 thermostat when the back light is off, first press any button to wake up the CCC 2 thermostat. Then press and release the ON/OFFbutton. The LCD will display the last programmed settings. To turn OFF the CCC 2 thermostat press the ON/OFF button and release.

How to check for continuity in an air conditioner?

Use an ohmmeter to check for continuity through the over- load device. If no continuity is found and the compressor is hot, allow 15 to 20 minutes for the compressor to cool. If a repeat of the test shows the overload to be open, it is defec- tive and requires replacement. Continuity should exist between all three terminals of the compressor.