How to replace a Kwikee RV step controller?
For your Kwikee controller the only option for a replacement is Lippert Components Kwikee Control Unit for pre-IMGL/9510 Step Control with 5323 and 5327 Switches # LC379606. It is possible though that on some older models of steps this controller may not function properly and you would have to replace the whole step assembly. view full answer…
Which is the correct control module for Kwikee steps?
The correct replacement control module for your Kwikee Steps with Control Module 909513 is the Lippert Components Kwikee Control Unit part # LC379606. view full answer…
When was the Kwikee RV control box 909506000 discontinued?
The Kwikee Control Box 909506000 has been discontinued by the manufacturer. If your steps were manufactured prior to February of 1999 then there are no replacement parts available and you’d need to replace the entire step.
Can a 1999 Dolphin fit a Kwikee control unit?
Installed into a 1999 Dolphin that had the sealed module. This unit worked perfectly. The three screw holes for mounting aligned with three of the old four. I did have to change out the door switch to the one that came with this unit as the old switch works backwards (normally closed -vs- normally opened issue).
For your Kwikee controller the only option for a replacement is Lippert Components Kwikee Control Unit for pre-IMGL/9510 Step Control with 5323 and 5327 Switches # LC379606. It is possible though that on some older models of steps this controller may not function properly and you would have to replace the whole step assembly. view full answer…
When to replace Kwikee 9510 step control unit?
The Kwikee 9510 Control for IMGL/9510 Step Control Unit is designed to be used with the magnetic door switches (normally open). The control unit is designed to be replaced on the IMGL step units that were manufactured from 2006 to present.
The Kwikee Control Box 909506000 has been discontinued by the manufacturer. If your steps were manufactured prior to February of 1999 then there are no replacement parts available and you’d need to replace the entire step.
What are the step test procedures for Kwikee?
Troubleshooting and Test Procedures The step test procedures outlined in this tip sheet are provided to troubleshoot and test all Kwikee IMGL automatic electric step functions. The procedures are designed to initially check the basic functions of the step separately from the RV wiring to determine whether or not the step is malfunctioning.
