How to remove quick connect faucet spray hose?
Faucet quick-connect removal (on kitchen faucet spray hose) This one was on a Project Source faucet. – YouTube If playback doesn’t begin shortly, try restarting your device.
How do you remove a hose from a Pfister faucet?
Remove the white quick connector from the hose by twisting it counter-clockwise. Note: Some older versions of this piece have two parts and may initially come apart as shown to the right. If that happens, simply remove the second piece and reconnect it to the quick connect assembly. Save this part for later.
How do you pull out a Pfister quick connector?
Simultaneously pull the green tabs down towards the floor – this relieves pressure on the collet holding the connector in place and allows you to remove it. Now pull the whole assembly down towards the floor and it will slide off. Remove the black and green quick connector from the hose by twisting it counter-clockwise. Save this part for later.
Where does the pull down faucet hose connect?
To troubleshoot your pull-down faucet hose, you often need to disconnect it. Your hose connects to the faucet at two ends–one to the sprayhead and one to the faucet body underneath the cabinet. Start with the end underneath the cabinet. We’ve made faucets for a long time and hoses have evolved over the years.
How do you remove a quick connect sprayer hose?
Hold the gray plastic collet in place with your fingers while maintaining upward pressure on the quick-connect housing. Pull downward to release the quick-connect housing, plastic collet and sprayer hose from the faucet supply tube. Use an adjustable wrench to compress the plastic collet instead of your fingers.
How to replace a Price Pfister faucet sprayer?
How to Replace a Price Pfister Sprayer 1 Go under the sink to turn off the faucet water supply at the shutoff valves. 2 Locate where the sprayer hose connects to the faucet under the sink. 3 Loosen and remove the nut securing the sprayer-head holder to the sink if you are replacing a separate side sprayer.
How do you get the quick connect hose out of a Pfister?
Place a bucket underneath the faucet connections. Turn on the faucet to release water pressure from the faucet. Push up on the quick-connect housing to compress the gray plastic collet. Hold the gray plastic collet in place with your fingers while maintaining upward pressure on the quick-connect housing.
How do you replace a side sprayer on a faucet?
Wrap new plumbers tape around the threads of the faucet where the sprayer hose connects. If replacing a side sprayer, slide the holder retaining nut over the hose. Thread the nut onto the holder and tighten until hand tight. Thread the end of the hose onto the faucet. Tighten the hose to the faucet with a faucet wrench.
