How to make a slide room in a schwintek?

How to make a slide room in a schwintek?

1. Extend the slide room until about ¼ of the room is left inside the unit. 2. Jack up one side of the slide room just enough to hold its weight (Fig. 1). 3. Place the 2×4 block on top of the slide room (standing on its edge between the T-Molding and side of the unit. 4.

Where is the motor retention screw on a schwintek slideout?

Locate and remove motor retention screw located near the top of each vertical column (Figs. 9 and 12). 3. Bend back wipe seal and visually locate motor (Fig. 10). 4. Pull the motor up until disengaged. Replace the motor retention screw to hold the motor in this position (Fig. 11). 5. Repeat this process for both sides of the slide room. 6.

What’s the override mode on a schwintek slide out?

Press the “mode button” six times quickly. Press and hold a seventh time for approximately five seconds (Fig. 3). 3. The red and green LED lights will begin to flash, confirming the override mode. 4. Release mode button. 5. Use the normal slide-out control switch to retract the room.

How to troubleshoot schwintek in wall slideout system?

1. Bend back wipe seal. Visually locate motor and motor retention screw. Remove the screw (Figs. 4, 5 and 7). 2. Pull the motor up until disengaged. Replace the motor retention screw to hold the motor in this position (Fig. 6). 3. Repeat this process for both sides of the slide room. 4.

What to do with a slide out coach?

1. Park the coach on the most level surface available. 2. Actuate the leveling or stabilizing systems to ensure coach will not move during operation of slide-out system. 3. Be sure battery is fully charged. 4. Be sure to keep all persons and pets clear of slide-out system during operation.

Where are the Coachmen RV manufacturing facilities located?

Coachmen… It’s a brand you can trust. Coachmen RV, a division of Forest River, Inc., is headquartered in Middlebury, Indiana, with our primary manufacturing facilities on nearly 220 acres with over 23 acres under roof. Compare the Coachmen advantages and you will see why Coachmen is the Leader to the Great Outdoors.

What does the red LED on a schwintek slide mean?

During operation when an error occurs the board will use the LEDs to indicate where the problem exists. For motor-specific faults the green LED will blink 1 time for motor 1, and 2 times for motor 2. The red LED will blink from 2 to 9 times depending on the error code.