How to install a Nest thermostat on a desk?
Replacing an existing wired thermostat 6 Install over a socket and power with the provided cord and plug Connect to the Stand for the Nest Learning Thermostat and place on a desk, shelf or other flat surface NOTE: The stand is sold separately and comes with its own Installation Guide More info at
Is the Nest Thermostat compatible with high voltage wires?
High-voltage wires If your thermostat is labeled 120V or 240V, or has thick wires with wire nuts, or has L1 and L2 terminal blocks, your system is high voltage and isn’t compatible with the Nest Thermostat. If you haven’t already, go to and enter your thermostat’s wires into the compatibility checker.
Do you need a jumper for a Nest Thermostat?
Jumper wires are short wires between two connectors. The Nest Thermostat doesn’t need jumpers. If your thermostat has jumpers, remove them, but save them along with your old thermostat. IMPORTANT:If you have Rh and Rc wires, you have a dual transformer system.
How do you install a new thermostat on a wall?
9. Install the base Remove the old thermostat and attach the base You can either attach the base directly to the wall or use the included trim plate to cover up marks or route cables that are outside the wall The trim plate and base snap together and should be screwed to the wall as one piece Install thermostat
How to troubleshoot adding a thermostat to the Nest app?
Troubleshooting adding the Nest thermostat to the app 1 Make sure your home Wi-Fi is working 2 Check the status of the Nest service 3 Check your app version 4 Restart your Nest thermostat 5 Restart your router 6 Check the settings on your Wi-Fi router or access point 7 Check the incompatible list
Why does my Nest Thermostat keep losing battery?
This is to conserve power so it can continue controlling your system. If your thermostat repeatedly loses battery charge, it may require a C wire or the Nest Power Connector. The Nest Thermostat will let you know when the battery level is getting low, but you can manually check it any time.
Do you need jumper wires for Nest Thermostat?
Jumper wires are short wires between two connectors. The Nest thermostat doesn’t need them. jumper wires your current thermostat uses in a safe place. reinstall your current thermostat. 5. Label the wires on your thermostat. You can also use the white labels for additional wires if needed.
What does Ping mean on Google Nest Thermostat?
Ping: Ping shows how long it takes for messages from your thermostat to travel to Nest servers and back. Ping speed should be lower than 1500 ms. You can try to improve your connection by removing sources of Wi-Fi interference below.
