How to diagnose and fix a hot tub leak?

We discuss hot tub leaks, broken hot tub or spa jets, hot tub or spa water temperature & heater repair, hot tub or spa pump diagnosis & repair, hot tub or spa filter maintenance, cleaning & repair, noisy air pumps at hot tubs, noisy water pumps at the hot tub or spa, and other hot tub, spa or whirlpool bath diagnosis & repair topics.

How to determine the cause of a spa leak?

Vessel leak (spa shell), pressure leak (after the pump) and suction side leak (before the pump) can be used to determine the cause of rapid leaks. The procedure is to fill the spa, mark the level of water with crayon or grease pen and let the spa run for 24 hours. Afterward, mark the new level to determine the level to which the water has dropped.

What to do if your Lay z spa pump is leaking?

Water Leakage. Error code for an issue with water leaking within the body of the pump. Check the couplings on the pump connections to ensure there is no water leaking from these. Also ensure the washers within these are flat. These can be checked using a screwdriver and simply unscrewing the coupling.

How to troubleshoot an issue with your spa?

To troubleshoot an issue with your spa, locate your specific problem in the chart below to help determine a probable cause, and then apply the right solution. Do you need to call a professional technician? Do you need to call a professional technician? Adjust the total alkalinity and pH.

Is it normal for my spa Jets to leak?

If you got through 1-5 and found no puddles or dripping water, it’s time to look at the spa jets, which leak rarely, maybe 10% of the time. Spa jets can leak where the flex pipe attaches (shown Green), either the larger water pipes, or the smaller air line.

What to do if your hot tub is not responding?

If the spa does not respond, contact your dealer for service. Press the “Jets” button on your control panel. Check that all the slice valves are open. The pump (s) may need to be primed.