How to adjust and replace a power steering drive belt?
Ease the belt onto the pulley. Never try to lever off the old belt, you may damage the pulley. Slacken the adjuster and pivot bolts, and push the pump inwards by the cast front plate until the belt is slack enough to ease off. Do not push against any other part of the pump or pipework, or you may damage it. Remove the old belt.
What to do if your power steering belt is too slack?
If the belt was too slack, increase the tension by levering the pump outwards with a strong screwdriver or flat bar. Lever against the cast front end of the pump body, just behind the drive-belt pulley — not against any other part of the body or pipework, which are easily damaged.
Can a slipping belt cause a steering problem?
A slipping belt can cause serious issues since your power steering will intermittently not function causing strange steering problems. Replacing the power steering belt requires a certain level of mechanical tools and skills. If you are uncertain then this is a job best left to professionals.
How do you change a power steering pump?
Locate the power steering pump bracket and–working from underneath the car–loosen the through bolt; then remove the pressure hose routing bracket. Place a catch pan on the floor, underneath the power steering pump fluid reservoir, and siphon as much steering fluid from the tank; then remove the pressure and fluid supply hoses from the pump.
Ease the belt onto the pulley. Never try to lever off the old belt, you may damage the pulley. Slacken the adjuster and pivot bolts, and push the pump inwards by the cast front plate until the belt is slack enough to ease off. Do not push against any other part of the pump or pipework, or you may damage it. Remove the old belt.
If the belt was too slack, increase the tension by levering the pump outwards with a strong screwdriver or flat bar. Lever against the cast front end of the pump body, just behind the drive-belt pulley — not against any other part of the body or pipework, which are easily damaged.
What kind of steering does a Dodge truck have?
Dodge trucks were provided with two different style steering setups from 1972 to 1993. The non-typical 1972-1977 style has distinct advantages for those looking to do such modifications as larger tires and lifts up to 3″, especially on diesel trucks that have a lot more weight on the front end. Picture 1
How often should I check my power steering belt?
Inspect the belt, along with the rest of the power-steering system (See Checking power-assisted steering ), at least every six months; at 6,000 miles or 10,000 km; at the intervals recommended in the car handbook; and, of course, at any time you suspect that it may be slipping.
