How tall is the spa at Sundance Optima?
The spa features a patented Fluidix Jets technology to provide different massage varieties and a jetted foot dome to nuke fatigue from your feet while seated. The Sundance Optima Spa has an overall height of 37.5” (95.3 cm), width of 89” (226.1 cm), and length of 89” (226.1 cm). It seats 6-7 people and has a total volume of 410 gal (1552 L).
Why did my Sundance 880 get a FlO2 error?
Have a 2010 Sundance Optima 880 spa (OXO3LCD-100378459-0710) giving me FLO2 error. After dropping the curtain to look for the flow switch (and giving it 2 power cycles) it came back to life. When it wasn’t running, flow switch open—closed once flow resumed.
What does Flo error on my Sundance spa mean?
A FLO error is going to indicate something is wrong with your circulation system, so start with the simplest problem: your filter. Even if you think it should be fine, give it a try. Sometimes we can’t see the problem with our eyes.
What should I use to clean my Sundance spa?
BEFORE you empty the tub, use a cleaner such as Spa Purge or Aqua Finnesse Spa Clean tablet. Let it run for 20 minutes or longer with all of your jets running and the filter removed–this should go a long way towards dissolving any gunk and build-up in your tubes and filter system. Drain, refill.
The spa features a patented Fluidix Jets technology to provide different massage varieties and a jetted foot dome to nuke fatigue from your feet while seated. The Sundance Optima Spa has an overall height of 37.5” (95.3 cm), width of 89” (226.1 cm), and length of 89” (226.1 cm). It seats 6-7 people and has a total volume of 410 gal (1552 L).
What to do if the main pump is off in Sundance spa?
If debris is present, remove debris, install switch and test system. If condition still exist, replace switch.) if switch measures infinite (no continuity) with pump off, switch is OK, Turn on Main pump and measure across switch terminals for continuity. If continuity is measured, switch is OK.
Why does my Sundance spa go into Oh error code?
Another issue that comes up and is an indication of a bad temp sensor is the temperature reading becomes inaccurate or the spa is going into the OH error code. If you power the spa down and power it back up it may work for a while but will do the same thing again. You need to replace the Temp Sensor. 3. FLO or OH Error Code
How can I tell if my Sundance spa heater is defective?
Flow Switch Test: You can test to see if the Flow Switch is defective by doing a continuity test on the flow switch by testing the 2 leads from the flow switch with the Pump off (no continuity) and Pump on (continuity). Do not bypass the Flow Switch: this could cause a potential dryfire of the heater and melt down of the heater system.
What to do if your Sundance spa has a PF error?
Should the power return to normal, the PF error will reset itself. If the error returns, contact your Sundance Spa dealer or a qualified service technician. Communication between control panel and/or remove control panel and circuit board is faulty. Contact your Sundance Spas dealer or qualified service technician.
Can a closed flow switch on Sundance Spas be repaired?
CLOSED or SHORTED FLOW SWITCH ON SYSTEM STARTUP (system disabled) Flow switch is non-functional. This must be repaired only be a Sundance Spas dealer or qualified service technician.
Is there a way to drain a Sundance Hot Tub?
Once you are ready to drain your hot tub, switch the power to the hot tub off. All Sundance hot tubs are equipped with a drain to remove the water from your hot tub. In addition to this drain, there are a couple of options available to speed up the hot tub draining process.
