How much water does an inground pool lose to evaporation?
The average pool water evaporation rate is about a quarter of an inch of water per day or more than two inches in a week, which on a 33′ x 18′ swimming pool (an average pool size) is more than 2500 liters or approximately 600 gallons a week; this may vary depending on your climate and the factors listed above.
How much water should a pool lose in a month?
But for a large pool that is 20 x 40 feet, it’s up to $33.50 per month with 125 gallons lost daily.
How much water does a pool lose per day?
Pools can lose as much as 0.25-0.5 inches per day (2-4 inches per week) due to evaporation alone. Obviously if your pool is losing 10 inches a week then there must at least be other causes. The best way to check if your pool losing water due to evaporation is to carry out the “bucket test”.
How can I tell how much water my Pool is losing?
The most accurate way to determine how much water your pool loses through evaporation is with a bucket test. That is, fill a reasonably sized bucket with water from your pool, mark the water level on the inside of bucket, and after 24 hours mark the new water level.
How can I reduce the loss of water in my swimming pool?
Note, during the summer period you will lose a lot more water through evaporation, possibly as much as double that of winter. You can greatly reduce water evaporation from your swimming pool by creating wind blocks – using solid fence enclosure, large rocks around your pool, and shrubbery all help to break the wind.
What happens to the water in a swimming pool?
Evaporation is when liquid turns into a gas or vapor. This process happens to almost any body of water under the right conditions, including swimming pools. This means, as a pool owner, you lose a measurable amount of pool water every day through evaporation.
Pools can lose as much as 0.25-0.5 inches per day (2-4 inches per week) due to evaporation alone. Obviously if your pool is losing 10 inches a week then there must at least be other causes. The best way to check if your pool losing water due to evaporation is to carry out the “bucket test”.
Why does my in ground pool lose water?
If the water level in your in-ground pool is dropping, there is a good chance your pool has a leak. All swimming pools will lose water from evaporation, but if you notice the water level being much lower than normal, chances are good that something is wrong.
What to do if you lose water in your pool?
Check the water level in your pool or spa tub before you cover it and turn off the pump system. You will know if the water level drops below normal. The bucket test can be used to determine water loss over 24 hours. Expect to lose about a quarter-inch in the uncovered bucket.
What should the water level be in an inground pool?
The skimmer basket assembly is one of the first places to check for a leak if the pool lost water overnight from the bucket test. The recommended water level for most inground pools is about two-thirds above the base of the skimmer. The level will fluctuate as the use of the pool changes.
