How much shock treatment should I put in my pool?

The general recommendation is to use 1 pound of cal hypo shock for every 10,000 gallons of pool water, and 10 ounces of sodium hypo with around 12.5% chlorine to sanitize your pool. Make sure the pool water is at its normal level. Make sure your pool’s pH is between 7.2–7.6 and its alkalinity is between 80–120 ppm.

How many gallons of shock do I need for my inground pool?

Typically for granular shock, you’ll need one pound for every 10,000 to 13,500 gallons of pool water. With over 8 million residential swimming pools across the US ranging from 5 thousand gallons to over 30 thousand gallons, the amount of shock you need to treat a swimming pool isn’t a one-size-fits-all answer.

How do I shock my Intex pool?

Generally speaking a good shock level is about 40% of your stabilizer level. To get this value, multiply your stabilizer level by 0.4. So if your stabilizer is at 40, you’ll need to raise your chlorine level to 16 to shock your pool. If your stabilizer is at 70, you’ll need to raise your chlorine to 28 to shock.

How long does it take for pool shock to work?

12 to 24 hours
Keep your pump and filter running. Give the shock a good 12 to 24 hours to work it’s magic. If the algae hasn’t cleared up after 24-48 hours, clean and brush the pool and add another shock treatment.

Can you shock a small pool?

You can, however, use more shock than you need – or less than is sufficient. In other words, while you shouldn’t worry too much about adding a little extra pool shock, there is still a right way and a wrong way to shock your pool if you want to get the best results.

How much shock do I need to shock my Pool?

How much shock do I need to shock my pool? A simple ratio and a standard rule of thumb to follow when you shock your pool is to dissolve one pound of either calcium hypochlorite or sodium dichlor for every 10,000 gallons of pool water.

When to use dichlor for pool shock treatment?

In addition to a shock treatment, dichlor can be used as a sanitizer and oxidizer. When using dichlor as a shock method, use 1 pound per 10,000 gallons of water. Similarly to cal-hypo, a dichlor shock should be added after the sun goes down.

Do you have to shock your pool after a rainstorm?

Yes, shocking the pool after a rainstorm can help restore order. You can use regular pool shock or non-chlorine shock, both are good. As far as how much to use, look at the label for dosage, and it will probably be 1 lb per 10,000 gallons or something like that… then do the math, to calculate the amount to use for your pool.

When to put a Cal Hypo shock in the pool?

To avoid damage to your pool surface, be sure to always pre-dissolve a cal-hypo shock before putting it in your pool. Additionally, cal-hypo shocks should be added in the evening when the sun goes down. You can enjoy your swimming pool after it returns to it’s typical chlorine levels. 2.

How much shock should I put in my swimming pool?

Convert the answer into pounds by dividing it by 16. This answer tells you how much pool shock you need to add. A good rule to remember is to use one bag of shock (1 gallon of liquid chlorine) per 10,000 gallons.

How often should I Shock my Intex pool?

Get a test kit that measures CYA (stabilzer) and when it starts to get to your target level, switch to plain bleach. If you keep all of your chemical levels in line, you shouldn’t need algaecide. Just an occasional shock every 7-10 days, or after a day of heavy use. I have a 10×30 intex frame pool.

Which is better pool chlorine or pool shock?

Chlorine is a great algaecide, I like to say. Pool shock, in the right amounts, will destroy all types of algae by slashing through their slimy outer shells and disrupting their cellular processes. Pink, Green, Yellow – none is a match for chlorine, in the right amounts.