How much horsepower can you get out of a 460?
A 74 460 can make over 530 HP and 580 ‘ lb of torque on a budjet build.
Are there 460 engines?
The 460 cubic inch eight-cylinder motor debuted all the way back in 1968 but found itself powering cars, trucks, and commercial equipment all the way to the end of the 1990s during its three decade run.
What size of motor is a 460?
Ford 385 engine
| Ford 385 V8 | |
|---|---|
| Configuration | Naturally aspirated Big-block V8 |
| Displacement | 370 cu in (6.1 L) 429 cu in (7.0 L) 460 cu in (7.5 L) |
| Cylinder bore | 4.360 in (110.7 mm) |
| Piston stroke | 3.59 in (91.2 mm) 3.85 in (97.8 mm) |
How many miles per gallon does a 460 get?
14.3 mpg on the highway, 10-12 in town, anywhere from 7-12mpg while towing depending on load.
What can 460 be stroked to?
See all 20 photos Ford 429 and 460 blocks share the same 4.36-inch bore diameter but juggled stroke to get 429 (3.59-inch stroke) or 460 (3.85-inch stroke) cubic inches.
How much power does a Ford 460 have?
General Information. The Ford 460-cubic-inch, V8 engine has a cylinder bore of 4.36 inches and a crankshaft stroke of 3.85 inches. The output for 460 engines built before 1972 is 365 horsepower at 4,600 rpm and 485 pound-feet of torque at 2,800 rpm.
How heavy is a Ford 460 engine?
A 460-cubic-inch engine block is 34 inches long, 32 inches wide and 30 inches high. The dry weight without gas and oil is approximately 720 pounds.
How can I get better gas mileage in my 460?
Building an engine for torque will not in and of itself improve fuel economy. You’ll want to install either an overdrive transmission or extremely numerically low (under 3-to-1) rear-end gearing to keep the engine in its low-rpm sweet spot.
What’s the difference between a Ford 460 and 460?
Gave a way better “hole shot” than the 460 did. Reasoning was that the 460 chain and gear was there for environmental reasons, to bring the engine into testing range emission- wise. Not necessary on the river. Some of the guys using the 460 for racing “The Great Canadian River Race”, were hitting in excess of 120mph going through the start gate.
Where was the Ford 460 V8 engine made?
Beginning in 1968, the Ford 460 was manufactured at Ford’s plant in Lima, Ohio. A stock 460 cylinder bore was measured at 4.36 inches and had a 3.85 inch stroke with a rod length of 6.605 inches which would create a nice rod length to stroke ratio of 1.71:1.
Is it possible to drive south in an RV?
Well, yes, but not for the faint-hearted and not in an RV. Allow me to explain. Going south on US 101 through northern California is a wonderful drive and highly recommended.
Can you change the cam on a Ford truck 460?
If you try to change the cam on a truck 460, you’ll be working on, or replacing, the heads to get adjustable valves, and if a Banks is out of your price range, so is that much performance work.
