How much ascorbic acid should I add to my pool?

Use a half a pound of Vitamin C for every 10,000 gallons of water. When you get the Ascorbic Acid in the water, you can turn on the pool pump and let the filters circulate the water for about a half hour.

How do I use ascorbic acid in my pool?

Use a vitamin C tablet and rub it against the stains to remove them. If you are treating larger stains, sprinkle ascorbic acid evenly around the water. use half a pound os ascorbic acid for every 10,000 gallons of water. Turn on your pool pump and let the filters circulate, letting it flow for about half an hour.

How long does ascorbic acid last in pool?

After getting the chlorine to the recommended level between 1 and 2 ppm, avoid shocking your pool for about two weeks to allow the ascorbic acid to be completely used up. After about two weeks, you will notice chlorine being used up as usual.

How long does ascorbic acid stay in the pool?

If you have a cartridge filter then remove the cartridges. Use a cup and go around the perimeter of the pool and drop it down the sides as you go. Let the ascorbic acid circulate for 1/2 hour. You will be amazed how the stain just disappears before your eyes.

How does ascorbic acid affect pool water?

The ascorbic acid will bring your ph down, and sometimes the alkalinity. After 24 hours you can start to rebalance the water. Bring up your ph and alkalinity, – use Arm and Hammer Washing Soda first, it will raise both ph and alkalinity.

Why did my pool liner turn yellow?

Perhaps the most common forms are calcium deposits (usually caused by incorrect pH balance) and body/sun tan oils. A reaction between modern sun creams and copper in the pool water can cause yellow staining on the liner material above the water line.

Is ascorbic acid safe to swim in?

Second, vitamin C is not toxic to aquatic life at the levels used for dechlorinating water. Although ascorbic acid is mildly acidic and, in large doses, will lower the pH of the treated water, sodium ascorbate is neutral and will not affect the pH of the treated water or the receiving stream.

How often do you add ascorbic acid to a pool?

What kind of acid should I use in my Pool?

The key to keeping your pool free of any kind of stains is ascorbic acid for pools. The following article will give you all the information you need about what this product does and how you can use it to treat your pool. What Exactly Is Ascorbic Acid? All pools get stains once in a while.

How much ascorbic acid to use for stain removal?

Add 1/2 to 1 lb ascorbic acid per 10K gallons. (I like to go lighter on it and see if all the stains lift off before adding more.) Use a cup and go around the perimeter of the pool and drop it down the sides as you go. Let the ascorbic acid circulate for 1/2 hour.

How can I get stains out of my Pool?

What kind of acid to use for pool stain?

Ascorbic Acid Treatment This is how you use a large amount of Ascorbic Acid to treat staining in your entire pool. I cover using bulk Ascorbic acid and also using Natural Chemistry “Stain-Free” – which is Citric acid. This is a good treatment if your pool has a lot of staining and the spot cleaning is not an option.