How many jets should a good hot tub have?
A basic smaller hot tub will probably be fine with 12 jets. Medium sized hot tubs have around 24 jets whilst larger models can have 50 or more. The positioning of the jets, variety, and quality are far more important than sheer quantity.
What happens when you turn off the Jets on a softub?
After the cycle has elapsed, the jets will continue to operate to heat the tub to the temperature you have set it to before returning to standby. Pressing the jets button again will turn off the jets and return the tub to standby immediately. Always keep the water level at least 2 inches above the top jet.
What do I do if my softub wont turn on?
Turn the air control valve on and off several times. If you cannot seem to shut off the air jets, you will need to toggle the air control valve to resolve the problem and shut the air valve. Press the “Jets” button on the control panel to turn on the jets.
What happens if my jetted tub is not working?
If you access the plumbing system to try and fix this problem, you may void your jetted tub’s warranty. If the jets in your tub are not working properly (or are not working at all), you may have a secondary issue on top of this primary problem.
Why are there no lights on my softub?
If there are no lights on the Softub’s control panel, check the ground fault circuit interrupter (GFCI) socket that the Softub is plugged into. The socket should have three prongs and two buttons on it.
After the cycle has elapsed, the jets will continue to operate to heat the tub to the temperature you have set it to before returning to standby. Pressing the jets button again will turn off the jets and return the tub to standby immediately. Always keep the water level at least 2 inches above the top jet.
Turn the air control valve on and off several times. If you cannot seem to shut off the air jets, you will need to toggle the air control valve to resolve the problem and shut the air valve. Press the “Jets” button on the control panel to turn on the jets.
Can a hot tub be set up with a softub?
These tubs plug into a household outlet and can be set up in a short amount of time. However, like any hot tub, Softubs might experience technical difficulties that you will have to repair like leakage or an obstruction in the jets. It’s easy to repair the most common Softub problems.
Are there any problems with the softub control panel?
While using a Softub, some problems may arise including the main control panel not working and water leaks. You may need to have your Softub professionally repaired, but there are things you can try before taking that step.
