How many feet is a toilet drain?
The toilet drain pipes should be 3 or 4 inches in diameter and slope down toward the stack at a rate of 1/8 to 1/4 inch per foot of length or should be vertical to the ground. From trap to vent on a toilet with a 3-inch pipe should be no longer than six feet, and for a 4-inch pipe the distance is ten feet.
Is there a toilet that doesn’t need plumbing?
A composting toilet is the original toilet without plumbing. Designed to compost waste in a hygienic and environmentally-friendly fashion, these composting toilet systems are popular in both homes and outbuildings. They are good for the environment and they are also known as “dry toilets”.
What happens when you move a toilet drain pipe?
When you go for the internal system you have to remove some flooring so that you can access, extend and then hide the piping under the floor. This is a lot of work. If you do it externally the main problem (which is more of an aesthetics problem rather than a plumbing problem) is that you will have a pipe showing.
Is it possible to move the location of a toilet?
Yes, moving the location of a toilet is usually possible, but is it practical? What I mean by that is when you move large 3- or 4-inch drain lines even a few feet, the cost can really bite into …
Can a toilet be moved away from the vent stack?
While usually this can be managed, it can limit the distance of the new toilet location, since the toilet needs to remain close enough to the vent stack or main drain to accommodate the necessary slope.
Why is moving a toilet such a dreaded task?
The reason why toilet moving is such a dreaded task is not so much the water supply line but the waste line — rerouting water supply to a new toilet location, while messy and requiring removal of drywall, is fairly straightforward.
Is it easy to move a toilet drain?
Relocating a toilet drain is a project with several challenges. You must cut into your floor to make a new drain hole, and plumb the drain to the home’s main line . However, if you take time to prepare for the job, it is much easier.
What happens if you move a toilet a few inches?
If you have a basement or crawl space below a first-floor bathroom, moving the toilet more than a couple of inches means you will have to reconfigure the waste water line and move the water line.
How is a toilet connected to a water line?
The water supply is probably connected to your toilet by a flexible supply line, so you might be able to get away with simply installing a slightly longer supply line tube. This would keep you from having to reposition the water line access point. The waste water line moves whatever you flush to your septic tank or municipal wastewater system.
What’s the best way to remove an old toilet?
Remove the old toilet by loosening the mounting bolts on the base of the toilet with a wrench. Turn the water line to the toilet off and disconnect the water supply to the toilet under the tank by turning the connector counter-clockwise. Pull the toilet off the flange and move it aside and out of the way. Step 2
