How long should the filter run in my hot tub?
Hot tub filters should be run for a minimum of 8 hours a day every single day. By keeping in accordance with this schedule, hot tub owners ensure that their hot tub water stays clean, the filters are not overused, and the cost of electricity is kept to an absolute minimum amount while still meeting proper safety needs.
How long should I run my spa filter each day?
Three Hours Twice a Day Is Recommended Most spa filter cycles are pre-set to run twice each day for four hours each time, but allowing the spa to cycle less often can save energy. Washington State University’s energy program recommends running the filter twice a day for three hours.
How to do 24 hour filtration at Sundance spa?
Select 12 AM for 24 hour filtration. Press the check mark button to confirm and activate the setting. Press the “Return” button (Top right hand corner) to return to the “Heat & Filter” menu. Back on the “Heat & Filter menu”, Press “2” for Secondary Filter, and select “Infrequent”, “Frequent” or “Away” mode.
How often should I Run my Sundance spa circ pump?
Most people run your Series of Sundance spa in Standard mode with a 24hr circ pump run time 12 months a year. Setting it up this way and always having a clean micro filter lessens the chance of the water chemistry and water clarity getting away on you.
How long does a Sundance Spa hot tub last?
The hot tub is programmed with a default setting starting at 12:00 AM and lasting for 8 hours, but this can be changed. This cycle addition to the normal operation. filter cycle. For example, the primary filter cycle is set to 8 hours every water after the cycle has finished. The next primary filter cycle will only be for 6 hours not 8 hours.
Why is my Spa 2 speed pump not working?
II have a 2002 Optima spa. Several months ago the button on the top-side control panel for the 2 speed pump (#1) stopped working. There’s a second, smaller control panel on the opposite side of the tub which also will not work. But when the preset filter cycles occur the pump will come on and the icon comes on on the display.
The hot tub is programmed with a default setting starting at 12:00 AM and lasting for 8 hours, but this can be changed. This cycle addition to the normal operation. filter cycle. For example, the primary filter cycle is set to 8 hours every water after the cycle has finished. The next primary filter cycle will only be for 6 hours not 8 hours.
What’s the default filter setting for Sundance spa?
The factory default setting is “Holiday”, so that secondary filtratrion is turned off. “Light” activates two 10 minute cycles (8 AM and 8PM) every other day. “Heavy” activates two 10 minute cycles (8 AM and 8 PM) every day. The time and duration of these cycles cannot be adjusted.
What kind of circulation pump does Sundance Spa use?
Note: This test only works on 850 Series with Circulation Pump prior to 2001: Try turning the #1 pump which is 2 speed.
Why is my Sundance Spa having trouble shooting?
1. Dirty Filter: even when you have cleaned the filter, the filter may be impacted and be time for a new filter. The only way to test this is to make sure there is no loose debris in the spa, then pull the filter out and see if the flow error goes away, if it does, it is the filter.
