How long can you leave water in a spa?
One cartridge keeps chlorine levels in your spa low while maintaining clean , soft water for up to four months. Water care is something you can easily manage yourself, and with normal use, your hot tub water will last up to 12 months before it needs to be drained and refilled.
How do you balance a hot tub after filling?
After filling the spa, adjust alkalinity to the 80-120 ppm range. Spa pH should be in the 7.2 – 7.6 range. A proper pH helps bromine and chlorine work their best, and good pH also helps prevent damage to seals, o-rings and surfaces.
What do you need to know about Maax spas?
Each MAAX Spas hot tub is made with three layers of insulation, a 56 frame pump and a steel sub structure to provide durability performance. Maax Spas is the creator of the Theramax jetting system that can be found in all of their hot tub models.
What are the dimensions of a Maax Hottub?
Maax Spa Colour Range XS-950E 2965 (L) x 2400 (W) x 1050 (H) mm Water Capacity 2230L Dry Weight 550kg Filled Weight 2780kg Maximum Seating Capacity 8 Maax Spa Colour Range XS-1000 2355 (L) x 2355 (W) x 923 (H) mm Water Capacity 1700L Dry Weight 418kg Filled Weight 2118kg Maximum Seating Capacity 6 Maax Spa Colour Range XS-740swim spa
Why does Maax spas water pump auto reset?
Once water temperature is below 108°F (42.2°C), system auto resets.Could indicate a pump operating at low speed for an extended time, constant filtering due to a programming error or a faulty pump. DO NOT GET INTO THE WATER! Take off the heat shield cover to allow the water to cool down.
What to do if your Maax spa heater shuts down?
The heater shuts down while other functions of spa continue to operate normally. You can add water, remove and clean filter if it’s dirty and open all jets to resume normal operation. If the problem persists, contact the dealer or service organization.
