How is a hot tub blower different from an air pump?
A hot tub blower is a unit that uses a fan to create air flow and then channels that air through the jets in a hot tub or spa. It is sometimes referred to as an air pump or a bubbler because it creates bubbling in the water (different from a hot tub jet). The components of a hot tub blower are the fan, motor, housing, and the ducting.
How many revolutions per minute does a hot tub blower work?
An electric motor — directly coupled to an impeller (or impellers, in a multistage design) — adds energy to the flow of air passing through the blower as the motor spins. Result: The velocity and pressure of the air flow increase dramatically. Water pumps normally operate at 3,450 revolutions per minute.
What makes a hot tub blower turn 90 degrees?
The number of 90-degree turns: Remember these turns add to the work a blower must do to force air into the spa.Water depth: Water pressure bearing down into the air channel or air injectors must be countered by the force of the air pushed through the piping. The deeper the water, the greater the burden on the blower.
How many pumps and Jets does your hot tub need?
Alternatively, if you have one pump. But is only pushing to 30 jets then your hot tub will be more powerful. Similarly, the larger the body of water. The more pumps you will need to push the same number of water out of each jet. This is the reason we usually recommend 2 pumps per 50-60 jets.
A hot tub blower is a unit that uses a fan to create air flow and then channels that air through the jets in a hot tub or spa. It is sometimes referred to as an air pump or a bubbler because it creates bubbling in the water (different from a hot tub jet). The components of a hot tub blower are the fan, motor, housing, and the ducting.
What does a hot tub blower do for You?
The blower is a unit that utilizes a fan to create air flow; it then forces the air through channels into the jets that allow for a release. The combination of air and water flow through the jets can provide a wonderful massage experience for the hot tub user.
Alternatively, if you have one pump. But is only pushing to 30 jets then your hot tub will be more powerful. Similarly, the larger the body of water. The more pumps you will need to push the same number of water out of each jet. This is the reason we usually recommend 2 pumps per 50-60 jets.
How does a Hartford loop hot tub blower work?
A Hartford loop is when the ducting is looped up inside the spa cabinet so that part of it goes above the water line. This acts like a sink drain trap and keeps water out of the motor of the blower.
