How easy is it to fit a Saniflo toilet?
Saniflo systems are designed to cut down on the need for complex and expensive plumbing, and installing them is a pretty straightforward experience – even if you’re not a professional plumber since it’s built to be a DIY project.
How does the saniflo upflush toilet system work?
Saniflo’s above-floor technology makes it possible, even if you were once told you can’t add a toilet to your home due to t he lack of a drain line. The upflush toilets will simplify your toilet installation by pumping your waste away to the nearest drain line and/or sewer system.
What’s the best way to install a saniflo toilet?
When installing against an outside wall, leave a few inches behind the macerator pump for insulation. STEP 5: Tap into or establish a fresh water supply to the installation area, and position the supply line valve 10 to 12 inches off the floor. Use cold water for toilet installations.
What are the pros and cons of a saniflo toilet?
Taking you from installing a saniflo toilet to the pros and cons of saniflo pumps, you will be upflushing in no time. What is a Saniflo Toilet? A saniflo toilet differs from a conventional toilet in two ways. Firstly, it macerates (breaks up) the waste in the toilet using a blade.
How does a saniflo / macerating toilet system work?
Firstly, it macerates (breaks up) the waste in the toilet using a blade. Secondly, instead of flushing waste through drainage in the floor, a saniflo toilet uses a centrifugal pump to flush the waste out of the toilet and into the general waste system. How Does a Saniflo/Macerating Toilet Work? A Saniflo toilet is made up of four key components.
What do I need to install a saniflo upflush toilet?
Here’s what you should have on hand: 1 A Saniflo upflush toilet pump system of your choice 2 An available water supply 3 A discharge pipe of a size ranging from ¾” to 1” 4 A source of electricity, preferably with a GFI breaker 5 A venting source
What’s the easiest part of the saniflo installation?
The next step in your Saniflo install is to tap into a fresh water supply. This is one of the easiest parts of the entire installation. You can use any existing water supply to connect your Saniflo system, and can even connect the toilet after the P-trap, if you have an existing sink or mudroom system you’d like to utilize.
Can you tell the difference between a saniflo and a standard toilet?
In fact – most guests to your home won’t be able to tell the difference between a standard toilet and a Saniflo system – especially if you purchase an extension pipe that hides the macerator and pump behind a wall. The only exception is the SaniBEST Pro.
How does the Macerator work on a saniflo toilet?
The macerator includes a rotating blade (think of the blade in the bottom of your blender). When you flush the toilet, the macerator turns on automatically, mixes the waste with flushing water, and grinds the solids into a fine slurry.
