How does the Pentair COMPOOL valve actuator work?
This 180-degree valve actuator is designed to use with 3-port Compool, Ortega and Jandy pool and spa valves. It works to prevent dead-heading of pumps. The built-in corrosion-proof enclosure will keep your pool or spa working hard with no interruptions. Included is a 3-wire, 25-foot cable, and 24-VAC.
What kind of valve do you use for COMPOOL?
Operates Compool, Ortega or Jandy Valves. ETL recognized & UL listed for use with IntelliTouch Needed an extra actuator to control water to our water feature and Pool Supply had the model I was looking for. My existing actuator’s rotation switch became inoperable.
Is the COMPOOL valve actuator compatible with Jandy and Hayward?
Compatible with all 24VAC Control Systems including Jandy & Hayward/Goldline Includes 25 ft. cable, Service switch (for flow direction) Operates Compool, Ortega or Jandy Valves. ETL recognized & UL listed for use with IntelliTouch Needed an extra actuator to control water to our water feature and Pool Supply had the model I was looking for.
What do you need to know about valve actuator?
If you don’t want it to operate through the full 180 degree turn then there are instructions telling you how to adjust the Cams internally to allow the movement to operate through any position up to the 180 degree. BEST ANSWER: Controller only sends a signal to tell valve to move to oposite position.
This 180-degree valve actuator is designed to use with 3-port Compool, Ortega and Jandy pool and spa valves. It works to prevent dead-heading of pumps. The built-in corrosion-proof enclosure will keep your pool or spa working hard with no interruptions. Included is a 3-wire, 25-foot cable, and 24-VAC.
What kind of valve actuator do I need for my Pool?
Pentair CVA-24T Valve Actuator 24V for 3-way Valve; after opening my pool this year the valve doesn’t seem to be closing completely leave a small trickle. How can I troubleshoot this? Remove the cover of the valve to expose the internal mechanism, adjust the position of the cam so the valve can move in a further direction to close completely.
Compatible with all 24VAC Control Systems including Jandy & Hayward/Goldline Includes 25 ft. cable, Service switch (for flow direction) Operates Compool, Ortega or Jandy Valves. ETL recognized & UL listed for use with IntelliTouch Needed an extra actuator to control water to our water feature and Pool Supply had the model I was looking for.
Operates Compool, Ortega or Jandy Valves. ETL recognized & UL listed for use with IntelliTouch Needed an extra actuator to control water to our water feature and Pool Supply had the model I was looking for. My existing actuator’s rotation switch became inoperable.
Is the COMPOOL cva-24 a bad limit switch?
(Compool CVA-24 bad limit switch). If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer. An error occurred while retrieving sharing information.
Can you change the degree of the Pentair COMPOOL?
Very simple setup, I need to change it from 180 degree to 90 degree by learning from the youtube. Only lasted two years. The product worked fine out of the package, but the internal gears failed after two years.
How can I rebuild my COMPOOL cva-24t actuator?
You’d simply swap out what you have with a new actuator and plug the wire into your automation panel. Easy enough if you wish to do that. Then you could buy the switches and rebuild what you have as a spare. These actuators are actually fairly easy to rebuild in the field.
Why is my Pentair COMPOOL cva-24t valve stuck?
So, I turned the CVA-24T toggle switch opposite to ON1 and then turned it back to ON2. It’s stuck at about 25 degrees. Not sure what that tells me except something is not working in the system. Not sure if this test confirms it is these digikeys or cams.
What’s the problem with the cva-24t actuator valve?
Digikey is a company. They are a supplier of active and passive components. Think of them like the Radio Shack of the internet. See this thread – Dead CVA-24T Actuator – What’s the likely cause? I found this schematic Matt. Any of these parts from the diagram look familiar? Which are the ones you’re referring to that may be the problem?
