How does the Macerator work in a Roadtrek?
The macerator enables the Roadtrek which is close to the ground to pump the waste and water out of the tanks with little gravity and it can even push the waste uphill if that is where the sewer hole is. Roadtrek felt that this is the better system for a Class B that is so close to the ground on the bottom.
How do you change the impeller on a Macerator?
Using a utility knife cut the hose a quarter inch past the pump discharge outlet port. Roadtrek used some kind of sealant around the pump discharge port making the hose impossible to remove. 4. Unscrew the small white plastic clamp that holds the gray waste gate valve cable.
When did the Flojet Macerator stop working on Roadtrek?
Please note that macerators now come standard on Roadtreks. UPDATE 4/22/2020: Our FloJet macerator stopped working in Fall 2018, so I replaced it with a much less expensive (about $70) macerator that I found on Amazon.
How does a Macerator work in a dump station?
The macerator will pump almost all the residual water out of the sewer hose. When I disconnect the macerator from the blue sewer hose, I will lift it to let the green discharge hose drain completely into the dump station sewer.
The macerator enables the Roadtrek which is close to the ground to pump the waste and water out of the tanks with little gravity and it can even push the waste uphill if that is where the sewer hole is. Roadtrek felt that this is the better system for a Class B that is so close to the ground on the bottom.
Using a utility knife cut the hose a quarter inch past the pump discharge outlet port. Roadtrek used some kind of sealant around the pump discharge port making the hose impossible to remove. 4. Unscrew the small white plastic clamp that holds the gray waste gate valve cable.
The macerator will pump almost all the residual water out of the sewer hose. When I disconnect the macerator from the blue sewer hose, I will lift it to let the green discharge hose drain completely into the dump station sewer.
Please note that macerators now come standard on Roadtreks. UPDATE 4/22/2020: Our FloJet macerator stopped working in Fall 2018, so I replaced it with a much less expensive (about $70) macerator that I found on Amazon.
How do you remove discharge hose from Macerator?
Now unscrew the discharge hose holding clamps (x2) from the macerator shield. Using a utility knife cut the hose a quarter inch past the pump discharge outlet port. Roadtrek used some kind of sealant around the pump discharge port making the hose impossible to remove.
Where is the Macerator located on my 190?
Open the side compartment where your macerator is located. On my 190 it is a lift up door for the side storage compartment. Also open the door – on mine – next to the storage compartment to the front of the van – to access the grey and black tank handles. You pull the hose out of its compartment, nozzle first.
How big is the water tank on a Roadtrek?
This is water will be clean water that has flowed down the drain and also water from washing your hands, washing dishes, and taking a shower. This water is likely to have soap mixed in. The Roadtrek has a 23 gallon grey tank and a 10 gallon black tank – yes, the black tank holds only ten gallons of water mixed with waste.
What is wrong with your Macerator pump hose on Roadtrek?
Roadtrek got a batch of bad hoses, have it replaced under warranty. What is wrong with your macerator hose on 08, 210? I also have a RT 210,’08…..hose does semm to be stiff? But I have no experience to know if it is not normal? I wonder what was wrong with Roadtrek’s BAD BATCH…of hoses???? I think they had a bad seam, and would spring a leak.
Can a Macerator be used on a roadtreker?
This was designed as a portable kit that included a case, macerator pump with connectors for waste hoses, and on⁄off hand switch with plug connector for 12 volt power. Please note that macerators now come standard on Roadtreks.
How big is the cold water hose on a Roadtrek?
The hose lable appears to say it is a 1″ cold water hose. I am hoping to find something more flexible but more durable if it exists. Anyone know of a source online to replace this hose?
