How does the JXI pool and spa heater work?
VersaFlo Integrated Bypass Technology The JXi™ with VersaFlo is the first and only swimming pool heater that automatically directs the flow of water through the heat exchanger when heat is needed and around the heater when heating is not needed — allowing you to save money on the filtration pump electric bill.**
What’s the warranty on a JXI pool pump?
5-Year Heat Exchanger Warranty – JXi heaters with VersaFlo factory installed receive an industry leading 5-Year standard warranty on the heat exchanger. Heat When You Want. Save When You Don’t. – The heater is typically only used 3.5% of average annual pump runtime, the other 96.5% of the time the heat exchanger can be bypassed
Why did my Jandy pool heater shut down?
Heater fires up 3 times for about 15 sec each and then shuts down with FAULT- CHECK IGN CONTROL error. The burner does light, I can see the flames and feel the blower and the heat. The flame sensor and air flow sensor seem to work as well.
Is the JXI ASME pool and spa heater corrosion resistant?
JXi ASME Pool and Spa Heater JXi™ ASME models are available with robust heat exchanger tubes and corrosion resistant bronze headers to meet the high stresses of commercial installations. See More View Downloads
What is the best heater for an inground pool?
Natural Gas is the most popular pool heater. This is the most widely used type of pool heater and is considered the best option. They heat up a pool relatively fast regardless of the air temperature. They are, however, expensive to operate and may not be as fuel efficient as other heating options.
What is in a pool heater?
A pool heater contains copper elements. More specifically, the “heat exchanger.”. This is the point where the water is actually heated and then returned back to the pool.
What is a gas pool heater?
Gas Pool Heaters. A gas pool heater is the most popular method of heating salt water pools and spas because of the speed and fuel efficiency when heating pool water to a warm and inviting temperature.
What is pool heating?
Solar pool heating generally refers to the process of using the passive solar heat of the sun to warm up a swimming pool.
Is the Jandy pool heater quick to heat?
I find my Jandy gas heater compact and quick to heat the pool. The design was well thought out and it looks well put together everything looks nice and tight. Extremely fast and efficient heater.
When to call for service on a Jandy pool heat pump?
If this does not correct the problem, call for service. When the head pressure builds too high, the high pressure switch will open causing the heat pump to shut off immediately. The control will sense this fault condition and shut off the compressor until the switch re-closes.
What to do if your Jandy pool heat pump does not start?
The following provides symptoms and solutions for general troubleshooting problems for Jandy heat pumps. Heat pump will not start, no control board display. Breaker or fuse may be tripped. Reset breaker or check fuse. If heat pump still does not run, call for service.
VersaFlo Integrated Bypass Technology The JXi™ with VersaFlo is the first and only swimming pool heater that automatically directs the flow of water through the heat exchanger when heat is needed and around the heater when heating is not needed — allowing you to save money on the filtration pump electric bill.**
5-Year Heat Exchanger Warranty – JXi heaters with VersaFlo factory installed receive an industry leading 5-Year standard warranty on the heat exchanger. Heat When You Want. Save When You Don’t. – The heater is typically only used 3.5% of average annual pump runtime, the other 96.5% of the time the heat exchanger can be bypassed
How often does a pool heater bypass the heat exchanger?
With two modes —Heat Mode and Bypass Mode — you can choose when water is directed through the heat exchanger. Pool heaters are typically used only 3.5% of the average annual pump runtime. The other 96.5% of the time, the heat exchanger can be bypassed so the pump works less — saving electrical energy and up to $350 a year.
Where is the off valve on a Jandy pool pump?
The majority of pools use Jandy valves, notice that the small handle part is the “on” position and the large flared part marked “off” is the off position. The suction line valve is located right in front of the pool pump. Turn this valve handle completely to the opposite direction.
Why did my Jandy JXI 400 not start up?
My brand new Jandy Jxi 400 wouldn’t start up the very first time we tried to use it. 1st Jandy says it’s because we don’t have the proper gas feed – 30’ @ 1 1/4” was plenty, but we upgraded to 1 1/2” after waiting 2 weeks for SoCal Gas and my plumber to be available to meet on the same day.
When did the Jandy pool heater stop working?
One star is generous. There was a problem loading comments right now. Please try again later. We purchased this heater after the heater we had for 17 years finally went. The pool heater was purchased in June 2018 and in August just 2 months later the heater stopped working and water was leaking out of it.
My brand new Jandy Jxi 400 wouldn’t start up the very first time we tried to use it. 1st Jandy says it’s because we don’t have the proper gas feed – 30’ @ 1 1/4” was plenty, but we upgraded to 1 1/2” after waiting 2 weeks for SoCal Gas and my plumber to be available to meet on the same day.
How to check the ignition of a pool heater?
Wondering if it’s the ignition control or the Main board. 1. 120 VAC to Igniter – Igniter heats to 2600 °F. – 40 second heat-up. 2. 24 V is sent on the Brown wire to Gas Valve Gas Valve Opens.
How long has Premier pools been in business?
For over 30 years we’ve been providing exceptional pool service to discerning home owners all over the United States. With branches and divisions all over the country it’s not hard to find a Premier Pools representative in your own local area. We are a full service pool care company and handle any and all pool service and repair requests.
Where can I get a free pool service?
Extend the life of your swimming pool and maintain a clear, fresh and healthy swimming environment – connect with professionals at Premier Pool Service for a free estimate today by filling in the form below or by contacting a local provider. You’ll be glad you did! “Our tech at Premier Pool Service was amazing.
Can a Jandy JXI work with a Hayward heater?
If your old Hayward worked it should be fine for your Jandy. During my recovery from the lightning strike I got one of the inexpensive gas manometers to check my gas pressure. You can do the same if you have problems or just gas company to increase your pressure.
Why is my Jandy pool heater not working?
It prevents water from flowing through the heater unless the heater is on which seems to be a good thing that will put less stress and chemicals on the heat exchanger over time so it’s in contact with pool water far less. Any thoughts recommendations? Problems with Jandy heaters?
How tall is the exhaust on a Jandy pool heater?
TOP: 6 inches (15 cm) EXHAUST SIDE: 6 inches (15 cm) from surface of the exhaust vent HEADER SIDE: 6 inches (15 cm) SIDE PANELS: 6 inches (15 cm) Service Access*
What are the requirements for a JXI pool heater?
The Jandy Pro Series JXi pool/spa heater is a blower assisted, internal combustion chamber, residential heater. General All gas fired appliances require correct installation to assure safe operation. The requirements for this pool heater include the following: Indoor vent adapter required for indoor installation.
How many BTUs does a Jandy pool heater have?
Efficiency is improved further by the Hot Surface Ignition System, a cutting-edge electronic ignition design. This model has 200,000 BTUs. AHRI Standard Rating Conditions.
Is it OK to use inauthentic Jandy replacement parts?
Use Genuine Factory Parts—It Does Matter! Using genuine Jandy factory replacement parts helps to ensure the ongoing quality and reliability of our products. Plus, the use of inauthentic parts voids all factory warranties. Inauthentic parts may appear to be suitable on the surface, but they often fall short of factory standards.
