How does the jetsetter hot tub system work?
The ComfortControl ® system lets you customize the strength of the massage. The SmartJet ® system allows you to direct power to the jets you are using, instead of powering all the jets at once.
How long does a spa circ pump last?
Spa circulation pumps are low flow, single speed pumps that run 24 hrs to keep your water filtered and heated. They run all the time, but are low energy use, drawing between 0.5 and 1.5 amps. Running all the time does accelerate wear and tear, and makes the average circ pump lifespan about 7-9 years.
What should the flow rate of a jet spa be?
In most cases this equates to approx 40lpm per jet. Therefore if you have: 4-6 jets you should select a pump with an approx flow rate of 200lpm – ie most 1.0hp pumps suit 4-6 jet spas. 6-8 jets you should select a pump with approx flow rate of 280lpm – ie most 1.5hp pumps suit 6-8 jet spas.
What kind of circulation pump does tiger river spa use?
This two speed circulation pump was used on 1995-1996 Hot Spring and Tiger River spa models that operate on 220volts. The second speed feature insured that the water flowing through the original 5500 Cartridge Style Heater would flow fast enough to prevent it from tripping the high limit sensor.
How do you replace a circ pump in a hot tub?
The circ pump is also likely screwed into the base of the equipment bay, remove the screws in the pump base, and set aside to use later on the new pump. Since there commonly are no cut-off valves on either side of a low flow circ pump, if your spa is full of water you will spill some water while installing a new circ pump.
This two speed circulation pump was used on 1995-1996 Hot Spring and Tiger River spa models that operate on 220volts. The second speed feature insured that the water flowing through the original 5500 Cartridge Style Heater would flow fast enough to prevent it from tripping the high limit sensor.
Spa circulation pumps are low flow, single speed pumps that run 24 hrs to keep your water filtered and heated. They run all the time, but are low energy use, drawing between 0.5 and 1.5 amps. Running all the time does accelerate wear and tear, and makes the average circ pump lifespan about 7-9 years.
What does a circulation pump do in a spa?
Circulation pumps are low-flow pumps that constantly circulate in water as slowly as possible to provide your spa a continued filter, heat and chemically treated water.
