How does a thermistor work in a Dometic RV refrigerator?
A thermistor of a Dometic RV refrigerator is a clip-on device that is attached to one of the cooling fins of the fridge. The main purpose of this device is to convey the temperature inside the fridge box to the control board. This is done so that the interior temperature of the fridge can be regulated and controlled.
Which is Dometic new dimensions refrigerator model NDR 1292?
We have a Dometic New Dimensions refrigerator model NDR 1292 in our 2001 Tradewinds Motorhome. For the last couple of weeks the temp on the inside of the refrigerator has been dropping. I checked a couple of troubleshooting websites and thought I would check the electric side first as the refrigerator worked fine on gas.
Where does the Dometic NDR 1492 boiler crimp go?
Restated, the temperature sensor tip shall not be straddling the air space created by the Dometic NDR 1492 boiler crimp. The manufacturer puts the crimp in the tube to hold the percolator tube within the boiler tube. Please see our How an Absorption Refrigerator Works to understand the basic principles of an Absorption Refrigerator.
What do you need to know about a Dometic refrigerator?
Check the air gap between the vent grills, top, and back . A gap should be around these areas. Check the vent grills for dirt and dust. Clean them off. Don’t pack it tight. The refrigerator needs to be able to circulate air in and around the food. If it’s packed tight it won’t cool like it should.
What kind of AC does a NDR 1292 need?
The refrigerator model NDR 1292 require a continuous 12 volt DC supply (even though 2-way models are designed to operate on 120 volts AC and gas, a 12 volt FIG. 3 10″ 120 Volt AC receptacle 4 DC control is required to maintain the automatic energy system).
We have a Dometic New Dimensions refrigerator model NDR 1292 in our 2001 Tradewinds Motorhome. For the last couple of weeks the temp on the inside of the refrigerator has been dropping. I checked a couple of troubleshooting websites and thought I would check the electric side first as the refrigerator worked fine on gas.
Restated, the temperature sensor tip shall not be straddling the air space created by the Dometic NDR 1492 boiler crimp. The manufacturer puts the crimp in the tube to hold the percolator tube within the boiler tube. Please see our How an Absorption Refrigerator Works to understand the basic principles of an Absorption Refrigerator.
What’s the inside temp of a Dometic refrigerator?
The Refrigerator is defrosted and there’s very little ice on the fins. After a full night of the door being closed the inside temp made it down to 39 last night on the highest setting in gas mode. It won’t go below 45 on the electric mode. Thanks, Brett, for your imput.
The refrigerator model NDR 1292 require a continuous 12 volt DC supply (even though 2-way models are designed to operate on 120 volts AC and gas, a 12 volt FIG. 3 10″ 120 Volt AC receptacle 4 DC control is required to maintain the automatic energy system).
