How does a single handle faucet cartridge work?
A cartridge is connected to a handle and resides within a valve, which resides within the faucet. When you turn the handle of a faucet, the handle turns the cartridge within the valve to control the flow of water out of the spout of the faucet.
How do you remove the handle from a Kohler faucet?
Remove the set screw with an Allen wrench and pull the handle straight off. Some single handle faucets and rotary handles have a cap on top hiding the securing screw. Locate a notch between the edge of the cap and the handle. Pry the cap off with a flat-head screwdriver to reveal the securing screw.
How does a two handle faucet control temperature?
Temperature is controlled by mixing hot and cold water with a side-to-side rotation of the handle. Cartridges for two handle faucets simply control water flow by turning the faucet handle left or right about 1/4 turn. The single handle disk faucet is hard to distinguish from a ball valve faucet.
How do you test a Kohler kitchen faucet?
Test the faucet once you think the water is shut off to ensure you’ve identified the proper water line. Kohler explains that you should then turn the handle to “on” to relieve pressure. In addition, be sure that there are not any power tools requiring electrical outlets near your sink while you work.
Where does the bonnet go on a Kohler faucet?
When working on your Kohler faucet, you must remove the bonnet to access the cartridge and O-rings. The bonnet covers the bonnet nut securing the cartridge or valve stem within the body of faucet. The bonnet is the piece between the handle and the faucet body.
How do you replace the handle on a Kohler single handle faucet?
Turn off the water to the faucet. Remove the plug button from the handle (Fig. 1). Loosen the screw underneath the plug button to remove the handle (Fig. 2). Unscrew the bonnet counterclockwise to expose the valve and the mounting nut; the bonnet should remove easily by hand (Fig. 3).
How long does it take to replace a Kohler valve?
See how to replace the valve in under 10 minutes with a few tools and a KOHLER replacement valve. If playback doesn’t begin shortly, try restarting your device.
Why is my Kohler kitchen faucet not working?
This debris build up may be caused by not properly flushing water through the faucet after installation. The action of turning the water supply on and off during a new installation can kick free dirt or debris within the home’s water lines.
What should I do if my kitchen faucet needs replacing?
Existing Faucet: To determine if the valve/cartridge, spray hose, or faucet body needs replacing, perform the following troubleshooting steps: With the water turned off at the faucet handle, remove the sprayhead from the sprayhead hose.
