How do you use a snake to unclog a main drain?
Gently feed the auger cable into the main line drain. Each auger, or plumbing snake, is different, so be sure to follow the instructions that come with the tool for best results. However, the general principle is that you should gently feed the auger cable into your drain pipe until you hit the clog.
Will a snake clear a grease clog?
Nothing clears a clog for good, but the best tool to clear grease clogs quickly and easily is a water jetter. So when your snake punches a hole in the grease to get the water flowing, you haven’t really cleared the clog completely. Water jets are ideal for clearing grease, as well as flushing sand and melting ice.
What do you need to unclog a drain with a snake?
You’ll need a snake drain, a screwdriver, hand gloves, and towels/rags. Using a screwdriver remove the cover of the shower drain to access the drain. After accessing the drain, place the end of the snake into the drain and drop it until you feel some resistance.
What kind of Snake do you use to drain a toilet?
In the snaking process, you’d use the drain snake (also known as a drain auger, electric eel, or a toilet jack) to destroy clogs sitting down the drain. I’ll teach you how to snake a drain – the right way!
How can I get a snake out of my Sink?
Remove the P-trap (this is the curved pipe that is under the drain of your sink). Remove it using a pipe wrench. Some P-traps are usually simply installed and may require hands to remove them. Place a bucket to collect water and other materials that may be trapped. 4.
What to do if you have a clogged drain in your sink?
Run water down the sink to check whether the clogs have cleared from the drain. When the operation is successful, the dislodged clog takes a few seconds to clear, after which water flows easily. If not successful, you can repeat the snaking operation or call a plumber for further assistance.
Can a drain snake be used to clear a clog?
To use a drain snake to clear a clog in a sink drain pipe, follow these steps: Optional but recommended – remove the P-trap, which is the bent pipe that sits right below the sink. This component can become damaged when using a plumber’s snake, so it’s best to remove and protect it.
Where is the best place to use a drain snake?
The bathroom and the kitchen are two of the most-used rooms in the home, and you shouldn’t be slowed down by a clogged drain. Getting rid of the clog quickly and easily begins by understanding the best drain snakes and augers to use for different types of clogs.
What can you put in a drain to get rid of a clog?
Pouring boiling water down the drain can dissolve the blockage. Adding detergent as a lubricant can help this process. Generally, the first port of call is the plunger, which forms a vacuum seal and removes clogs. The hanger is bent, and the hook inserted into the drain to pull out the blockage.
What’s the best way to clean a clogged kitchen sink?
In an empty sink, put the baking soda down the drain followed by the vinegar. Plug the drain and wait at least an hour. Unplug the drain and pour a large pot of boiling water down the drain. You can read about other homemade solutions that may work to unclog your sink here in our article on Homemade Drain Cleaners That Work
