How do you unlock the topside on an Arctic spa?
Topside has been partially locked. To unlock, press and hold pump 1 button for 5 second (LocF). Then press and hold for a further 5 seconds. Topside has been fully locked.
What does Flo mean on Arctic Spa?
FLO Error. If your spa is displaying the FLO error code on the topside control panel, it is indicating that the heater is not reading enough water pressure. Keep in mind that as with all error codes displayed on the screen, the heater is not allowed to turn on.
Is the spa topside control panel returnable?
Since spaside panels are not returnable, this entails some risk on the spa owner. But there are some ways to reduce the risk… read on. Bottom line is – it could be a bad spaside control panel, or it could be a bad spa control board, or a bad cable that runs between the control panel and the control board.
What does the spaside control panel look like?
The spaside control panel, it’s just a convenient way to turn things on and off, and view equipment status lights and water temperature. Topside controls typically consist of a small LED or LCD screen, touchpad membranes and LED indicator lights, topped with a pretty decal or overlay, as they are called.
What does a topside control panel look like?
Topside controls typically consist of a small LED or LCD screen, touchpad membranes and LED indicator lights, topped with a pretty decal or overlay, as they are called. Topside controls can be digital, analog, or a combination, and are made for both air control systems and digital control systems for spas.
What to do if your hot tub control panel is dead?
This is why it is important to keep the control panel in good working order. Check out hot tub controls on Amazon. If part of the control panel is dead or the whole panel is frozen, you will want to see if the problem is the circuit board or the control panel.
Since spaside panels are not returnable, this entails some risk on the spa owner. But there are some ways to reduce the risk… read on. Bottom line is – it could be a bad spaside control panel, or it could be a bad spa control board, or a bad cable that runs between the control panel and the control board.
The spaside control panel, it’s just a convenient way to turn things on and off, and view equipment status lights and water temperature. Topside controls typically consist of a small LED or LCD screen, touchpad membranes and LED indicator lights, topped with a pretty decal or overlay, as they are called.
Topside controls typically consist of a small LED or LCD screen, touchpad membranes and LED indicator lights, topped with a pretty decal or overlay, as they are called. Topside controls can be digital, analog, or a combination, and are made for both air control systems and digital control systems for spas.
This is why it is important to keep the control panel in good working order. Check out hot tub controls on Amazon. If part of the control panel is dead or the whole panel is frozen, you will want to see if the problem is the circuit board or the control panel.
