How do you unlock the temperature on a hot tub?
To unlock the panel, while holding down the “Temperature” button (or the “Up” button if you do not have the “Temperature” button), gently press and release the “Light” button twice.
Why is my hot springs spa not heating?
Why is my Hot Springs spa not heating? • Integrated pressure switch open – check for clogged filters. The integrated pressure switch will reset when the flow of water through the heater has been restored. Contact our customer service team for a service if the heater trips frequently.
What to do if your hot spring spa lights keep blinking?
Turn power to the spa off for 1 minute, then turn power back on. For 240 v spas, turn on the 20 amp breaker and then turn on the 30 amp breaker. For 120 v spas, plug in. If light continues to blink, Call our Spa Service Department for a service call. 413-594-2666 ext 110 My Hot Spring Spa has blinking Green and Red lights.
How to troubleshoot a hot spring pool filter?
A quick test to see if the spa filter is the cause: Turn the power off to the spa at the main breaker then take out the filter with the gray knob (make sure that nothing is floating in the spa that could get sucked into the filter area). Turn the spa back on without the filter to see if it begins operating properly.
What does a blue light mean on a hot spring?
Should your blue light be blinking, it typically means your high-heater thermostat tripped. In this case, we suggest disconnecting power for at least 30 seconds to reset a higher heat limit. Should this not work, checked for clogged filters. If the problem continues call for service.
Why is my Hot Springs spa not heating? • Integrated pressure switch open – check for clogged filters. The integrated pressure switch will reset when the flow of water through the heater has been restored. Contact our customer service team for a service if the heater trips frequently.
Turn power to the spa off for 1 minute, then turn power back on. For 240 v spas, turn on the 20 amp breaker and then turn on the 30 amp breaker. For 120 v spas, plug in. If light continues to blink, Call our Spa Service Department for a service call. 413-594-2666 ext 110 My Hot Spring Spa has blinking Green and Red lights.
A quick test to see if the spa filter is the cause: Turn the power off to the spa at the main breaker then take out the filter with the gray knob (make sure that nothing is floating in the spa that could get sucked into the filter area). Turn the spa back on without the filter to see if it begins operating properly.
Should your blue light be blinking, it typically means your high-heater thermostat tripped. In this case, we suggest disconnecting power for at least 30 seconds to reset a higher heat limit. Should this not work, checked for clogged filters. If the problem continues call for service.
