How do you unclog a drain with a coat hanger?

How do you unclog a drain with a coat hanger?

Clog, Be Gone!

1. Step 1: Remove the shower drain plug or cover.
2. Step 2: Look in your closet for a wire hanger—you’re going fishin’!
3. Step 3: Stick the hook end into the shower drain hole as far as it will go, rotating the hanger as you push it down.
4. Step 4: Repeat Step 3 until the hanger comes out clean.

How do you remove a bathtub drain trap?

Remove the knob on the top of the stopper. Hold the body of the stopper in place with one hand and with the other hand unscrew the knob by turning it counter-clockwise. If the knob will not unscrew, then wrap the rag around the knob and use the pliers to help remove the knob.

How do you get a hanger unstuck?

If you just pull on the hanger, it should bend before it breaks or damages the pipe. If that doesn’t end up being the case, then you’ll need to call a plumber but it seems likely you’ll have to do that anyway. You could try twisting the free end of the wire around a six inch piece of broom stick or large dowel.

How do you get hair out of a drain without a hanger?

For best results, start by squirting a little dish soap into your drain, followed by a cup of vinegar and a cup of baking soda. Wait five minutes or so, for the chemical reaction of the vinegar and baking soda to take effect, then chase that with a cup or more of boiling water.

Can you use a wire hanger to unclog a drain?

Using a wire coat hanger, you can clear most clogs without having to disassemble the drain or using harsh chemicals. Keep reading to find out how you can clean your drain using a coat hanger. Unwind the looped end of the wire from the hook using needle-nose pliers and straighten out the hanger as much as you can.

How can I get a coat hanger out of a drain pipe?

If that doesn’t end up being the case, then you’ll need to call a plumber but it seems likely you’ll have to do that anyway. You could try twisting the free end of the wire around a six inch piece of broom stick or large dowel. Use this as a handle to pull fairly hard on the wire while simultaneously twisting the wire down in the pipe.

How can I get soap out of my bathtub drain?

Hair and soap often accumulate underneath the strainer, which is located in or over the drain. Though many strainers can be removed manually, some have screws that will need to be removed, too. Remove the screws with the proper screwdriver. If you do not know which type of screwdriver to use, match the screwdriver to the screw head.

What’s the best way to remove a tub strainer?

Some drains have tub stoppers instead of strainers, and these are also located in the drain. These are easier to remove because they are not held down with any screws. Simply remove the stopper by twisting and lifting it. Remove excessive gunk around the strainer and stopper.

What’s the best way to unclog a bathtub drain?

Strainers will need to be screwed back onto the top of the drain, whereas you can just place the stopper back in the drain. Buy a chemical drain cleaner from the store. Chemical drain cleaners unclog drains with chemicals such as potassium hydroxide or sulfuric acid. When properly used, they will clear most drain clogs.

How do you get a wire hanger out of a drain?

Work the wire hanger into the drain hook side first. When you feel what’s stuck in the drain, move the hanger around to hook the blockage or item. Then, pull it out.

What’s the best way to remove a stuck tub drain?

The tub drain wrench is the perfect tub drain extractor tool. If you have a stuck tub drain, the tub drain wrench with a socket wrench and another long plumber wrench should do the trick as we show in this how to remove bathtub drain flange and tub drain install video.

Can a Hunker remove something stuck in a drain pipe?

Hunker may earn compensation through affiliate links in this story. You can remove stuck object from your drain pipe. If you have a drain in your home that is barely draining, something might be stuck inside the pipe. In some circumstances, you might have watched an actual object fall into the drain.

How do you remove a P-trap from a drain pipe?

All you have to do is disassemble the P-trap. This procedure is simple, and you can usually do it by hand, but you may need a pair of adjustable pliers. Unscrew the compression nut at the mouth of the trap, lower the trap and swing it away, then unscrew the nut at the exit of the trap, where it meets the trap arm, and pull the trap off.