How do you turn off a Viking Spa?
Press the “Jets” button once to activate the low speed of the pump and again for the high speed. Press the “Jets” button again to turn off the pump. If left running, the low speed of the pump will automatically turn off after 4 hours, and the high speed will automatically turn off after 15 minutes.
Why does my hot tub never shut off?
The most common causes of hot tub jets not functioning properly include the jets being blocked or the pump not working correctly. If the jets stop working, users should open them and ensure there are no blockages or calcium buildup, and the hot tub’s filters should be thoroughly cleaned.
How do I turn the heat up on my Viking spa?
Upon initial start up, the spa will heat up to the default temperature of 100 degrees. To change the desired temperature, press the temp button until the desired temp. is blinking, then press the temp. button to adjust.
How do you turn off the light on a Viking spa?
Light. Press the “Light” button to turn the light on and off. If left on, the light automatically turns off after 4 hours. In spas equipped with LED light, press the light button consecutively to change the color sequencing. Mode. The mode is changed by pressing the “Temp” button, then pressing the “Light” button.
Do you have to open gate on Viking spa?
It is very important to make sure that the spa is filled at least 3/4 way up the skimmer opening. Make sure the gate valves are in the open or up position. WARNING: Do not run spa with gate valves closed or run pump with no water circulating in spa for long periods.
When do the filters start on Viking spa?
The first filter cycle begins 6 minutes after the spa is energized. The second filter cycle begins 12 hours later. Filter duration is programmable for 2, 4, 6, 8 or (12 hours continuous filtration, indicated by “FC”). The default filter time is 2 hours. To program, press “Temp,” then “Jets.” Press “Temp” to adjust.
What are the safety precautions for Viking spa?
PERSONAL SAFETY PRECAUTIONS. 1. Please use the spa when others are present. 2. Children should have spa access only with the permission and supervision of an adult. 3. To reduce the risk of child drowning, keep the spa filter clean and unclogged. Do not modify the suction or filtration systems.
Light. Press the “Light” button to turn the light on and off. If left on, the light automatically turns off after 4 hours. In spas equipped with LED light, press the light button consecutively to change the color sequencing. Mode. The mode is changed by pressing the “Temp” button, then pressing the “Light” button.
The first filter cycle begins 6 minutes after the spa is energized. The second filter cycle begins 12 hours later. Filter duration is programmable for 2, 4, 6, 8 or (12 hours continuous filtration, indicated by “FC”). The default filter time is 2 hours. To program, press “Temp,” then “Jets.” Press “Temp” to adjust.
PERSONAL SAFETY PRECAUTIONS. 1. Please use the spa when others are present. 2. Children should have spa access only with the permission and supervision of an adult. 3. To reduce the risk of child drowning, keep the spa filter clean and unclogged. Do not modify the suction or filtration systems.
It is very important to make sure that the spa is filled at least 3/4 way up the skimmer opening. Make sure the gate valves are in the open or up position. WARNING: Do not run spa with gate valves closed or run pump with no water circulating in spa for long periods.
