How do you troubleshoot a Hayward salt system?
Check Salt and Inspect Cell LED flashing or ON
- Verify that the salt level is between 2700 – 3400 ppm. 3200 ppm is the ideal salt level.
- Inspect and clean salt cell, if necessary.
- Check the cell voltage and amperage in both polarities. To switch polarities, toggle Main Switch from Auto to Off, and back to Auto.
Do you need a salt chlorine generator for Hayward pool?
Just like any other salt chlorine generator, the Aqua Rite may need a quick ‘tune up’ from time to time. Using information provided by Hayward Pool, we have created the following troubleshooting guide to help pool owners understand the diagnostic codes and quickly restore their Hayward Aqua Rite salt chlorination system. Important Tips!
What should the salt level be on my chlorine generator?
Your chlorine generator is still producing chlorine at the moment, which is a good thing. This is more of an indicator light than anything else. The salt level is 2300 ppm or less and no chlorine is generating. Step 1: Check your system to confirm that you have programmed the correct cell size.
What should the salt level be in my Hayward pool?
Push the diagnostic button until “T-XX” appears on the display. Step 2: Verify the accuracy of the salt readings (2700-3400 pm) with an independent test kit or by taking a water sample to your local pool store for testing. 3200 ppm is the ideal level. If the salt level is below range, add enough salt to achieve a salt level of 3200 ppm.
Why is the salt readout on my Heyward chlorinator high?
Check under the diagnostics menu for the correct cell size. If you select the cell size to t-3, t-5 or t-9 instead of the correct t-15 then the salt readout from the controller will be high salt. Hello! I have a slightly different problem: I recently purchased online a new Heyward/Goldline T-cell-15 chlorinator.
Just like any other salt chlorine generator, the Aqua Rite may need a quick ‘tune up’ from time to time. Using information provided by Hayward Pool, we have created the following troubleshooting guide to help pool owners understand the diagnostic codes and quickly restore their Hayward Aqua Rite salt chlorination system. Important Tips!
Your chlorine generator is still producing chlorine at the moment, which is a good thing. This is more of an indicator light than anything else. The salt level is 2300 ppm or less and no chlorine is generating. Step 1: Check your system to confirm that you have programmed the correct cell size.
Push the diagnostic button until “T-XX” appears on the display. Step 2: Verify the accuracy of the salt readings (2700-3400 pm) with an independent test kit or by taking a water sample to your local pool store for testing. 3200 ppm is the ideal level. If the salt level is below range, add enough salt to achieve a salt level of 3200 ppm.
Where can I get a pool chlorine generator?
Click here for replacement Salt Cells. Say goodbye to chemical heavy pool maintenance routines, irritated skin, and that strong chlorine smell, and hello to a salt chlorine generator from Pool Supply Unlimited!
