How do you take down an Intex pool?
Fold your Intex pool for storage, fold the wall part of the material in on all sides, then with two people, pull one side of the pool over to meet the other side. From here, keep folding in half until you have a long strip, about 3-4 feet wide. Roll or fold this up into a manageable size.
Do you have to take down an Intex pool?
As per guidelines, Intex will always recommend you disassemble your pools and store them before the winter begins. This is because most parts of the component cannot withstand the temperature when kept outside. At less than 32oF, the ice could damage the pool and pool components.
How do you flatten the bottom of an Intex pool?
The trick is begin filling the pool with water (a regular garden hose is fine, more than one will fill more quickly), then get into the pool after the level reaches about one inch. Leave the water on, and get down to your knees and work the wrinkles out by hand.
Can you winterize an Intex pool?
If you want to winterize your Intex pool without breaking it down, you can. Just remember how susceptible they are to ice damage, and consider whether you want to run the risk of ruining your pool for the sake of skipping the chore of closing it.
Can you put sand under Intex pool?
Can I use sand under my Intex Pool? The folks at Intex are fairly clear that you should NOT put sand under your pool. The sand can easily wash away, causing voids under your pool and risking your pool leaning and even collapsing.
What’s the best way to fold an Intex pool?
Fold your Intex pool for storage, fold the wall part of the material in on all sides, then with two people, pull one side of the pool over to meet the other side. From here, keep folding in half until you have a long strip, about 3-4 feet wide.
What should I do if my Intex pool starts to drain?
If draining to an open area, you may want to move the hose during draining to avoid erosion or over-saturation. On some Intex pools, you may need to screw a Hose Adapter onto the female garden hose end and then thread the hose adapter into the drain valve. This will prevent the water from coming out immediately when you remove the drain cap.
What should the pH level be in an Intex pool?
For reference, lemon juice is around a 2, while bleach sits at about 13. Now, as far as your Intex pool’s pH is concerned, there’s a specific range to aim for. The proper pH level for Intex swimming pools is between 7.4 – 7.6. To increase your pool’s pH: Use a pH increase like sodium carbonate
Is the Intex pool the same as a permanent pool?
While Intex pools aren’t the same as permanent swimming pools, they still require similar chemical maintenance. Not only for keeping the water germ-free and swimmers safe, but also to preserve the swimming pool itself. Balanced water is gentle on pool surfaces and accessories, while unbalanced water is corrosive and breaks them down faster.
