How do you synchronize pool lights?
To re-synchronize your lights, turn the switch on, then back off, then wait between 11 and 14 seconds and turn the switch back on. When the lights come back on, they should enter program #1, and be synchronized. Refer to the included color card as a quick reference to the available programs.
When I turn on my pool light it trips the breaker?
In many pool lights there is a safety device that is built into the pool light fixture called a thermistor. The way this safety device works (or is supposed to work) is when a light bulb in the fixture overheats, the thermistor is triggered and trips the breaker or GFCI.
How long should a pool light work?
A pool light fixture is gasket sealed to prevent water from reaching the bulb behind the lens, however water surrounds the entire fixture, keeping it cool. Do not operate the light for more than 1-2 seconds without it being fully submerged.
How do I resync my Hayward pool lights?
Why does pool light come on but does not turn colors?
If your lights come on but don’t change colors when they should, you can isolate the problem before undertaking repairs. Some pool lights that change colors rely on small motors that rotate a multicolored lens so different portions of the lens filter the light being emitted by a single bulb.
How can I Turn On my Pool Light?
Turning Your Lights On and Off Much like any other light in your home, the most common way to control your pool light is with the use of a traditional ON/OFF switch. You can simply flip the switch up or down to turn on or off your pool light. Sometimes though, the most difficult part is finding the correct switch.
What happens when a pool light is tripped?
When a breaker is tripped, it flips to an idle position and will not resume current flow until it is completely reset by hand. To reset the breaker, find the flipped breaker, push it to the complete off position and then flip on. If the switch is not completely reset, it will spring back to idle.
Why do you need a light in your pool?
Pool lighting gives parents and chaperones better visibility of the bottom of the pool, especially towards the deeper end. For the most part, pool lights are exactly like any other light in your home. The only reoccurring question we come across is how do you control the actual light?
How do you change the color of a swimming pool light?
Switching between the colors in your swimming pool light is actually very similar to turning the light on or off. Flipping the switch initially turns your light on. Turning the switch off then on again will set the light to the second color.
Why is my Pool Light not turning on?
Most pool lights screw into place and have waterproof housings, which means that once the power is turned off you can remove them by hand. Dry off the housing and open it to reveal and replace dead bulbs, a faulty motor or damaged wiring.
How long does it take for a pool heater to turn on?
The heater will kick in as expected right after the switch is flipped but after about 45 seconds or so, the “Service System” light goes on and the burner shuts off (but not the blower).
What is the purpose of a pool light?
Although most pool lights don’t have a specific function, they provide something to your pool the rest of your pool equipment cannot: the mood. Sometimes, choosing the right color for your pool makes all the difference to your guests and the overall ambiance of your pool setting.
