How do you start a Arctic spa hot tub?

How do you start a Arctic spa hot tub?

Startup Procedures

1. a) All Models: Push the pump 1 button a second time to turn the pump to high speed. Allow to run for 1 minute.
2. b) Signature: Push pump 2 button also.
3. c) Legend and Legend Select: Push pump 3 also.
4. d) SDS Series push pump 4 button once to turn on and run for one minute.

What does Arctic spa error code HL mean?

Hi-Limit
The HL reading in the display stands for Hi-Limit. The hi-limit is measuring the temperature at the heater, not the actual water temperature of the spa. if your spa is reading HL, it will not allow your heater to turn on and therefore you will notice the pumps will be running close to 24 hours a day.

What is boost on spa boy?

Adding Arctic Pure BOOST or other chlorine sanitizers will raise sanitizer levels above the Spa Boy Systems maintained chlorine/ORP optimum range (545mV-550mV) causing the Spa Boy System to shut down until the chlorine/ORP reading is below the optimum range, 545mV/ORP.

What does HL mean on a CleverSpa?

a blockage
HL Error Code – What does it mean? An HL error usually means there is a blockage, preventing water from circulating around the pump & heating system.

What makes Arctic Spas the best hot tub company?

Arctic Spas is renowned for its insulation packages and efficient heat recovery systems, which work to contain heat in the coldest of environments. They were even one of the first hot tub companies to provide smartphone control for hot tub monitoring! Does Arctic Spas manufacture the right tubs for you?

How does spa boy work at Arctic spa?

Beyond the top-notch construction design and versatile spa options, lies the Spa Boy software. This automated water care system takes the guess out of maintaining your Artic Spas tub. The technology utilizes medical-grade sensors that analyze water cleanliness parameters that are key to a balanced spa.

How many people can fit in Arctic spa?

Arctic Spas essentially crammed everything they use with their tubs into this beautiful specimen. The last spa in the Classic Series is the Timberwolf, which has more than enough room for three people with a single upright seat and two loungers. If you’re looking for a spa with a smaller footprint, this Arctic spa is a solid choice.

Why is my hot tub not connecting to WiFi?

So that’s just a quick way to tell you if there’s a problem between the phone and the WiFi or whether the problem is between the WiFi and the processor, or whether it’s the processor or the Spa itself.

How to fix Arctic Spas Hot Tub error messages?

This post looks at the common Arctic Spas hot tub error messages. And how you can fix them yourself. Arctic Spas have been manufacturing quality spas since 1994. They were founded on values of quality and craftsmanship. And have carried these values throughout their journey of manufacturing for the past 20 plus years.

What to do if your hot tub is not working?

Remove the spa cover and allow water to cool. Once the heater has cooled, reset by pushing any button. If the hot tub does not reset, shut off power to the spa and call your supplier for a service. Flow switch open. The system does not detect any water pressure while the pump is running. Check the water level is normal and the skimmer is unblocked.

When did Arctic Spas start making hot tubs?

Arctic Spas have been manufacturing quality spas since 1994. They were founded on values of quality and craftsmanship. And have carried these values throughout their journey of manufacturing for the past 20 plus years. You have Successfully Subscribed!

What does TST mean on Arctic Spa hot tub?

Topside has been fully locked. To unlock, press and hold pump 1 button for 5 seconds. When the spa is powered up it perform a check to see if the ‘hi-limit’ probe is attached to the heater. While this is happening ‘tst’ will be displayed. No action needed. Carrying out a check. If the heater probe test above fails then this will be displayed.