How do you set the temperature on a spa?
The spa will run on low speed (though high speed can be turned on and off) until the spa reaches the set temperature or an hour has passed. After 1 hour, the spa will return to Rest mode. Press either the Temperature Up or Down button. While the temperature is flashing, press the Lights button.
When do I Turn on Economy mode on my spa?
Note that the last measured spa temperature displayed is current only when the pump has been running for at least 1 minute. “St” or “Std” will appear on the display momentarily when you switch into Standard Mode. Economy mode heats the spa to the set temperature only during filter cycles.
Where is the high limit reset button on a spa heater?
This is a red button found on many spa packs. It may be located on the heater and covered by a rubber nipple. Press the high-limit reset button. When this button is tripped, it will “click” in when you reset it. Turn on your spa and observe its operation.
What does it mean to set Spa to ready mode?
If you would like to ensure that the spa is always heating to the set temperature, you can set the spa to Ready mode.* In Ready mode, the spa will perform “Polling”. This is when the jets run on low speed to circulate the spa and test the temperature of the water.
Why does my Master Spa have two heating modes?
There are also two heating modes, when your unit does have a circulation pump it will always be in ready mode, which allows for on-demand heating so that your water will always be at at set temperature. On hot tubs without a circulation pump, if you want to keep your water at a set temperature make sure to leave it on the ready mode.
The spa will run on low speed (though high speed can be turned on and off) until the spa reaches the set temperature or an hour has passed. After 1 hour, the spa will return to Rest mode. Press either the Temperature Up or Down button. While the temperature is flashing, press the Lights button.
Is there a limit to how hot a hot tub can be?
To make your hot tub turn up the heat, you need to make sure you follow the specifications for your specific model. Hot tub companies have limits to how hot you make it due to health concerns and based on normal human body temperature. All modern hot tubs are set to allow a maximum of 104° F.
Can a hot tub be left on rest mode?
On hot tubs without a circulation pump, if you want to keep your water at a set temperature make sure to leave it on the ready mode. However, if you’re ok with your water temperature fluctuating slightly you can keep it on the rest mode and it will only heat during established filtration cycles.
