How do you set the temperature on a Cal spa hot tub?
Spa Will Not Hold Set Temperature – Make sure you have the heating mode set properly. Many Cal Spas have 3 modes. Change these settings by pressing TEMP followed by LIGHT buttons. All 3 modes will rotate.
What do you need to know about Cal spas?
Cal Spas. Consumers can add a Spa Surround to any of the company’s hot tubs that makes the whole hot tub area look custom to their backyard. Cal Spas is one of the oldest manufacturers of hot tubs in North America and with that comes tremendous experience and a quality product.
What should the temperature be on my spa?
Contact your dealer for more assistance. If power to the spa was shut off, the temperature may have reset after the power was restored. The automatic default for temperature is 100°F. If power goes off and then comes back on, the spa may reset to factory default temperature of 100°F. Raise the temperature on the control panel.
What to do if your hot tub does not reset?
DO NOT ENTER THE WATER. Remove the spa cover and allow water to cool. At 107°F, the spa should automatically reset. If spa does not reset, shut off the power to the spa and call customer service. Spa is shut down.
How to order a new Cal Spa hot tub cover?
When ordering your Cal Spa replacement hot tub cover just leave the dimensions field blank. Leave us a note in the note section saying what model you have, and The Cover Guy will take care of the rest. You can Order your new Cal Spa Replacement Spa cover here.
Cal Spas. Consumers can add a Spa Surround to any of the company’s hot tubs that makes the whole hot tub area look custom to their backyard. Cal Spas is one of the oldest manufacturers of hot tubs in North America and with that comes tremendous experience and a quality product.
When did Cal spas start making hot tubs?
Cal Spas was founded in 1979, and they currently offer more than 250 product models. Each of their hot tubs can be customized from a list of thousands of options, and the company places an emphasis on innovative touches and quality workmanship.
When ordering your Cal Spa replacement hot tub cover just leave the dimensions field blank. Leave us a note in the note section saying what model you have, and The Cover Guy will take care of the rest. You can Order your new Cal Spa Replacement Spa cover here.
Contact your dealer for more assistance. If power to the spa was shut off, the temperature may have reset after the power was restored. The automatic default for temperature is 100°F. If power goes off and then comes back on, the spa may reset to factory default temperature of 100°F. Raise the temperature on the control panel.
