How do you reset the check on a Hayward remote?
Turn the filter pump on. You must reset the system by entering the ‘Diagnostic Menu’ and then hitting the right arrow key once and then pushing the plus key once. This should reset the light and message.
How to use Aqua Pod?
Slide the Aqua Pod into the charging stand and charge for at least 5 hours before attempting to operate remotely. Charge the Aqua Pod at temperatures between 32ºF and 113ºF (0º – 45ºC). The Aqua Pod can be used while in the stand no matter what state the battery is in.
How do I connect my Aquaconnect?
Setup Web Control Press and hold the “Teach” button. Continue to hold the “Teach” button WHILE plugging in the power cord. Keep pressing the “Teach” button until all four LEDs blink in unison, then release button. Place the Aqua Connect Home Network in a desirable location close to the home network router.
Is there a remote control for the aqua pod?
Spa jets on, spa jets off, pool lights on or off, you’re in control the smart way with Aqua Logic. At the touch of a button or the ease of a predetermined programed program the choice is yours, the choice is Aqua LogicControl.
How to use aqua pod on Pro Logic?
a. On any Pro Logic or Aqua Logic display/ keypad unit press the “Menu” button (pos- sibly multiple times) until “Settings Menu” is displayed. b. Press “<“ or “>” (again, possibly multiple times) until “Teach Wireless” is displayed. c. Press the “+” button to start the teaching process. d.
What kind of remote control do I need for my Prologic pool?
Handheld Remote Terminal for ProLogic, AquaLogic, AquaPlus and OnCommand Pool Controls USE ONLY HAYWARD GENUINE REPLACEMENT PARTS IMPORTANT SAFETY INSTRUCTIONS When using this electrical equipment, basic safety precautions should always be followed, including the following: • READ AND FOLLOW ALL INSTRUCTIONS
How many Hayward pump actuators does ProLogic control?
ProLogic: How It Works • All ProLogic systems are salt chlorination ready and can control 4-16 high voltage relays, 3-4 valve actuators and 1-2 heaters. • These systems can manage: Hayward Variable Speed Pumps, ColorLogic Lighting, Sense & Dispense, AquaConnect Homenet, as well as a wide variety of remotes.
Spa jets on, spa jets off, pool lights on or off, you’re in control the smart way with Aqua Logic. At the touch of a button or the ease of a predetermined programed program the choice is yours, the choice is Aqua LogicControl.
Is the aqua pod compatible with Aqua logic?
The Aqua Pod is also compatible with all Aqua Logic controls operating with software revision r2.60 or higher using an AQL2-BASE-RF base station operating with soft- ware revision r3.00 or higher . Note that the Aqua Pod will NOT communicate with a AQL-BASE-RF base station.
What is the aql2 pod2 for Hayward Prologic?
The AQL2-POD2 (AquaPod 2.0) is a wireless remote touchscreen terminal for Hayward ProLogic, AquaLogic, AquaPlus and OnCommand pool automation controls. The AquaPod 2.0 is wireless and portable. Its unique weathertight housing and floating design allows it to be used outdoors, even while inside the pool or spa. Compatibility
Where does the wireless antenna go on a Prologic pool?
Dual equipment capable Full Functional Control of Pool, Spa and Other Outdoor Features with control of multiple heaters and chlorinators Must be used with a Wireless Antenna which installs directly onto the side of the ProLogic, AquaPlus or OnCommand main control unit at the equipment pad and communicates with all other wireless accessories.
