How do you reset a Hayward Aqua Trol?
To reset, turn the unit to Off and then back to Auto. Wait for the relay to click (5 to 10 seconds). Desired Output % Dial 1 to 100% sets the level of cell operation in % of operating time.. Example: 50% (factory default) cell is operating and generating chlorine 50% of the total pump/filter operating time.
How do you unlock the configuration menu in aqualogic?
Press the ‘Menu’ until, ‘Configuration Menu-Locked’ appears. To unlock, press and hold the (<) & (>) until the text, on the display, changes from ‘Locked’ to ‘Unlocked’ (unit will beep).
Is the Goldline Aqua rite salt chlorinator still working?
The unit is actually a re-branded Goldline Controls “Aqua Rite” unit and seemingly has ceased working. I have weekly pool service and the unit has been cleaned several times, the las by me. It’s clean as a whistle and the salt reading is just about 2600.
What kind of remote does the Hayward Goldline use?
Hayward Goldline automatic controls sold here. All models available. W3PRO15-2 includes 24″ cable. For versions 2.6 or higher software. Hayward Aqua Puck Wireless Remote Hand-Held 6 – Function Remote For versions 2.5 or lower software. Hayward Aqua Puck Wireless Remote Hand-Held 6 – Function Remote
What does remote control on Aqua rite mean?
REMOTELY CONTROLLED When illuminated, indicates that a remote pool automation control (Goldline Aqua Logic, Pentair Intellitouch, Polaris Eos, etc.) is controlling the Aqua Rite–the main switch and “Desired Output %” adjustment are inactive.
What causes bubbles in a Goldline salt chlorinator?
First off never trust any of the chemical readings these things spit out. The largest problems are caused from the cells not being cleaned. Remove the cell and soak for a couple minutes in a 20-30% acid water solution but no longer or you can damage the cell. You should see bubbles as soon as you put the cell in the acid water.
How can I recalibrate my Goldline pool panel?
You can do this by purchasing a salt meter or salt water test strips, or take the more practical approach of visiting a local pool store with a water sample. Any good pool store will do computerized water testing and salt checks. If your salt reading is different from that of the pool stores we will recalibrate your cell to the pool stores reading.
What does no flow mean on a Goldline pool pump?
If the pump is not running, the system will show “NO FLOWâ€, if flashing this is just a warm up process and the unit is waiting for the water to begin moving through the cell to carry the chlorine out to the pool. Once flow is established the unit should begin to display the “POWER†& “GENERATING†lights solid green.
How to reset the Goldline / Hayward SWG panel?
To reset these light just push the black selector button in for 3 to 5 seconds and this will reset the trouble lights. After about an hour my readings were… Average 3200 and instant 3400 which is more in line with my tests. This also removes all past salt averages that may be in memory.
How to change temperature on Goldline SWG panel?
If you need to change the reading, press the diagnostic button once to display the temperature. Then slide the switch up to “SUPER CHLORINATE†for a few seconds, as long as the “SUPER CHLORINATE†light illuminates, you can switch back, this should be instantaneous. This procedure will toggle between the two different settings.
